Entering Analog Inputs In Standard Volume; Or Mass Flow Option - GE TransPort PT878GC User Manual

Entering Analog Inputs in Standard Volume

or Mass Flow Option

If you have enabled the Standard Volume or Mass Flow options,
the screen displays different options, as shown in Figure 4-17
below.
Input A
Figure 4-17: The Analog Inputs Option Window, with the
Standard Volume Option Activated
1. The screen displays the function (pressure or temperature),
label (pressure or temperature) and units selected in the Inputs
form of the Standard Volume option (see page 4-20). You
cannot change these parameters in this form. Press the [ ]
key to step through these parameters.
2. The first prompt asks for the zero input value.
a. Press
[ENTER]
b. Use the numeric keys to enter the desired value.
c. Press
[ENTER]
3. The final prompt asks for the span input value.
a. Press
[ENTER]
b. Use the numeric keys to enter the desired value.
c. Press
[ENTER]
Programming Site Data
Analog Input
Input B
Pressure
Function
Label Pressure
Units
Psia
Zero
Span
100
Cancel
to enter the text box.
to confirm the entry.
to enter the text box.
to confirm the entry.
0 Psia
Psia
April 2009
OK
4-37