Changing Communications Parameters - GE TransPort PT878GC User Manual

Changing Communications Parameters

On occasion, you might need to change the parameters by which
the PT878GC communicates with a PC over the wireless infrared
interface. To check or change these parameters:
1. From the Meter menu, scroll to the Communications entry and
[ENTER]
press
to Figure 7-6 below.
Comm Interface
Figure 7-6: The Communications Window
2. The first prompt asks for the node identification number,
which can be any number from 1 to 240.
IMPORTANT:
a. Press
[ENTER]
b. Use the numeric keys to enter the node ID.
c. Press
[ENTER]
Programming Meter Settings
. The Communications window appears similar
Communications
Node ID
Baud Rate
Parity
Stop Bits
Data Bits
Cancel
Do NOT change the node ID unless instructed by
GE Sensing.
to open the text box.
to confirm the entry.
2
IR 232
IrDA
9600
None
1
2
7 8
April 2009
bps
OK
7-15