Installing The Transducers - GE TransPort PT878GC User Manual

Installing the Second Bracket (cont.)
The spacing should now appear similar to that shown in Figure
3-21 below.
Figure 3-21: The Installed CFG-PI Fixture,

Installing the Transducers

1. Check to be sure the second CFG-PI holder bracket is
correctly positioned.
2. Apply a bead of CPL-16 couplant 6 mm (0.25 in.) wide on
each transducer face. (See Figure 3-22 below.)
Figure 3-22: Couplant on Transducer Face
Installing the Dampening Material, Transducers and Fixtures
S
with Calculated Spacing
April 2009
3-23