Table of Contents
Advertisement
Screen (cont).
The middle of the screen is the work area, which displays the
measured parameters, numeric measurements, and both bar and
line graphs. (When you enter a selection on the Main Menu
discussed in Chapter 4, Programming Site Data, this area
displays menu prompts.) A line at the bottom of the area also
displays error code messages, which are described in more detail
in Chapter 10, Diagnostics and Troubleshooting.
The system tray, shown in Figure 2-6 on page 2-10, displays
icons that indicate meter operations not otherwise shown. Table
2-3 below lists the icons and their meanings.
Table 2-3: Icons in the System Tray
Icon
The bottom of the screen displays the three feature key options:
F1, F2 and F3. The feature keys have different functions,
depending on the task you are performing.
Initial Setup
Function
IR Transfer
Alert
Log Running
Log Pending
Stopwatch
Snapshot
(To file)
(To Printer)
Meaning
IR data transfer in progress.
Indicates the meter encoun-
tered an error in operation.
Indicates a log is running
(marks).
Indicates a log is pending (no
marks).
Calibration Gate Operation:
Watch is stopped when the
gate is closed, or runs when it
is open. (See page 3-46.)
Indicates that the Snapshot
function has been activated,
so users can take screen cap-
tures (see page 6-23).
April 2009
2-11
Advertisement
Table of Contents
