Setting up User Tables (cont.)
4. The final prompt asks you to enter or change data in the user
table.
a. Press
[ENTER]
similar to Figure 7-10 below.
Programming
Figure 7-10: The Edit User Table Window
b. Use the four arrow keys to move to the desired entry in the
table.
c. Press
[ENTER]
desired data, which appears in the right corner of the
window above the table.
d. Press
[ENTER]
the appropriate slot in the table.
Programming Meter Settings
to open the window. The screen appears
Edit User Table 1
UserTable1
1
2
3
4
5
Cancell
. Then use the numeric keys to enter the
to confirm the data, which then appears in
April 2009
Y
OK
7-21