Table of Contents
Advertisement
Setting up a New Log (cont.)
Pressure
Diagnostics
Velocity
Temperature
Volume
Fwd Totalizer
Rev Totalizer
StdFwdTotalizer
StdRevTotalizer
No Unit
Figure 8-7: The Select Measurement Window
2. Scroll to the desired output type.
3. Press
[SEL]
to confirm your selection.
4. The prompt then moves to a list of unit types. (The available
units depend on the selection made at the Data Source
prompt.) Scroll to the desired output unit.
5. Press
[F3]
(OK) to confirm your selection.
6. You can repeat this procedure for up to 12 different
parameters.
7. When you have finished, press
[F3]
entries, or
log.
If you started the log from the New Log option, the PT878GC
returns to Operate Mode; if you started it from within the Log
Manager, the meter returns to the Log Manager.
Logging Data
Select Measurement
Cancel
(Activate) to confirm the entries and start the
m/s
OK
[F2]
(Cancel) to cancel the
April 2009
8-9
Advertisement
Table of Contents
