April 2009
Updating Software Via IrOBEX
To begin updating software via IrOBEX, scroll down to the Flash
Update entry in the Service Menu and press
appears similar to Figure 9-27 below.
--WARNING--
This will erase the
instrumentation coding.
Choose 'Cancel' to exit or 'OK'
to continue.
Figure 9-27: The Flash Update Window
•
[F2]
Press
erasing the program.
•
[F3]
Press
program.
4. The meter asks for confirmation. Repeat the options shown in
Step 1 above. After the PT878GC reboots, the screen appears
similar to Figure 9-28 below.
GE Sensing PCI Loader v3.0
[HW Rev3+]
Backup Battery: OK
Firmware CRC: Valid
Reload Flash via Infrared (Yes/No)?
IrOBEX
Figure 9-28: Flash Reloading Window
9-44
Update Flash
Cancel
(Cancel) to return to Operate Mode without
(OK) to confirm that you wish to erase the
No
[ENTER]
. The screen
OK
2/26/04
IrCOMM
Servicing the PT878GC