GE TransPort PT878 User Manual
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Measuring Instruments
  5. Transport PT878
  6. User manual

GE TransPort PT878 User Manual

Transport portable liquid flowmeter
Hide thumbs Also See for TransPort PT878:
Table of Contents

Advertisement

Quick Links

GE
Sensing & Inspection Technologies
Flow
TransPort® Model PT878
Portable Liquid Flowmeter
User's Manual
910-219 Rev. F
November 2009

Advertisement

Table of Contents
loading

Related Manuals for GE TransPort PT878

Summary of Contents for GE TransPort PT878

  • Page 1 Sensing & Inspection Technologies Flow TransPort® Model PT878 Portable Liquid Flowmeter User’s Manual 910-219 Rev. F November 2009...
  • Page 3 Sensing & Inspection Technologies TransPort® Model PT878 Portable Liquid Flowmeter User’s Manual 910-219 Rev. F November 2009 GESensingInspection.com ©2009 General Electric Company. All rights reserved. Technical content subject to change without notice.
  • Page 4 [no content intended for this page - proceed to next page]...
  • Page 5 WARNING! It is the responsibility of the user to make sure all local, county, state and national codes, regulations, rules and laws related to safety and safe operating conditions are met for each installation. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 6 Make sure that operators and maintenance personnel have all safety equipment applicable to the auxiliary equipment. Examples include safety glasses, protective headgear, safety shoes, etc. Unauthorized Operation Make sure that unauthorized personnel cannot gain access to the operation of the equipment. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 7 Preface Environmental Compliance Waste Electrical and Electronic Equipment (WEEE) Directive GE Sensing & Inspection Technologies is an active participant in Europe’s Waste Electrical and Electronic Equipment (WEEE) take-back initiative, directive 2002/96/EC. The equipment that you bought has required the extraction and use of natural resources for its production.
  • Page 8 Preface [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 9: Table Of Contents

    2.2 Caring for the PT878 Batteries........
  • Page 10 3.11.3 Entering a Calibration Factor ........67 viii Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 11 4.1.11 Transferring a Site File in Text Format to a PC ....84 4.1.12 Transferring a File from a PC to the PT878..... . . 85 4.1.13 Listing Files by Name.
  • Page 12 6.12Taking a Bitmap Capture of a Current Screen ......130 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 13 7.6.2 Listing Logs in Chronological Order ......154 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 14 8.12Updating PT878 Software ........
  • Page 15 10.6Available Options ........... . 218 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 16 C.3.1 Connecting the RTD to the 4 to 20-mA Transmitter ... . . 246 C.3.2 Connecting the Transmitter to the PT878..... . . 247 Appendix D.

  • Page 17: Chapter 1. Features And Capabilities

    The PT878 has the ability to store site data in files which can be accessed at a later time. Within the Main Menu, a set of forms (windows) asks you all the necessary setup information for a particular site.

  • Page 18: System Description

    In other words, they act like loudspeakers when transmitting the signal and microphones when receiving it. In the PT878 system, each transducer acts as both a receiver and transmitter, since a series of ultrasonic pulses are alternately sent upstream and then downstream through the flowcell.

  • Page 19: Electronics Package

    Chapter 1. Features and Capabilities 1.2.2 Electronics Package The PT878 consists of circuits that generate, receive, and measure the travel time of the ultrasonic pulses. It also contains a microcomputer that controls operation and calculates flow measurement parameters. Specific circuits function as follows: •...

  • Page 20: Theory Of Operation

    (downstream) travel slightly faster than the pulses that travel against the flow (upstream). The PT878 uses various digital signal processing techniques, including cross-correlation, to determine transit times and then uses the transit times to calculate flow velocity.

  • Page 21: Chapter 2. Initial Setup

    • Obtaining On-Line Help Figure 1 below shows the PT878 in its standard soft case (a) and in the optional solid case (b). In the solid case, the interior is structured for optimal protection of the PT878 and its accessories.

  • Page 22: Making Electrical Connections

    • Infrared Interface Make all connections to the top of the PT878 unit as shown in Figure 2 below. Please note that you need to make the proper power and transducer connections only. The other connections are required for particular functions, but are not necessary for basic operation.

  • Page 23: Power Connections

    Liquid Transducer Installation Guide (916-055). 2.1.3 Input/Output Connections The PT878 provides one 0/4-20 mA current output and two 4 to 20-mA analog inputs with switchable 16-V supply for loop- powered temperature transmitters. It also supports digital, frequency, and totalizer outputs.

  • Page 24: The Infrared Wireless Interface

    -based PCs. Users can send and receive site and log data. They can also program the meter using the optional PanaView software interface. The PT878 was designed for use with products that comply to the IrDA protocol. For more information on establishing IR communications between the PT878 and your PC, refer to Appendix F.

  • Page 25: Caring For The Pt878 Batteries

    When the PT878 is plugged into line voltage, the internal battery charger automatically charges the batteries, whether the PT878 is on or off. If the PT878 is on, the Battery icon in the upper right corner of the screen indicates battery status (as shown in Table 2 on page 10).

  • Page 26: Replacing The Batteries

    600 times, it is best to replace them when they no longer provide acceptable performance. To replace the batteries, remove the rubber boot, open the panel located on the back of the PT878 unit, disconnect the batteries, and replace with new ones (see Figure 3 on page 11).

  • Page 27: Disposing Of Batteries

    Battery Location (behind panel) Figure 3: Battery Location To further extend the battery power on the PT878, the GE Part #705-1283 option uses 6 AA alkaline batteries. 2.2.3 Disposing of Batteries Never dispose of the batteries by incineration. Do not CAUTION! attempt to disassemble or short-circuit the batteries.

  • Page 28: Powering On And Off

    Chapter 2. Initial Setup 2.3 Powering ON and OFF To operate the PT878, the power cord must be plugged into line voltage or the battery must be charged as described previously. IMPORTANT: For CE compliance, the PT878 is classified as a battery-powered device, not to be used with the AC adapter.
  • Page 29 After the meter conducts all the self checks, the screen then appears similar to the one shown in Figure 4 below. ABC.SIT 2000/11/30 09:53 AM Velocity, ft/s Signal, dB 0.00 Volume, l/s Delta-T, ns 0.10 E0: No Errors Figure 4: Screen After Powering ON Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 30 PT878 to normal [F3] operation. If the PT878 locks up, you can reset it by holding the power key (the red key in the upper right corner) for 15 seconds. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 31: Using The Screen And Keypad

    Chapter 2. Initial Setup 2.4 Using the Screen and Keypad The essential features for operating the PT878 are the screen and keypad. Although these features are common on portable instruments, the PT878 design offers particular features to simplify and speed operation.
  • Page 32 (see page 130). (To Printer) The bottom of the screen displays the three function key options: F1, F2 and F3. These keys have different functions, depending on the task you are performing. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 33: Keypad

    Chapter 2. Initial Setup 2.4.2 Keypad The PT878 keypad has 25 keys. The functions for each key are as follows (see Figure 7 on page 18): • 3 function keys ( ) — enable you to select the special [F1]...
  • Page 34 Chapter 2. Initial Setup 2.4.2 Keypad (cont.) PT878 – • MENU ENTER Figure 7: PT878 Keypad Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 35: Obtaining On-Line Help

    Chapter 2. Initial Setup 2.5 Obtaining On-Line Help The PT878 offers context-sensitive on-line help screens that describe various features. You can access on-line help at any time by pressing the [?] key. The screen appears similar to Figure 8 below.
  • Page 36 Chapter 2. Initial Setup [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 37: Chapter 3. Programming Site Data

    The PT878 can store up to 1 MB (or 32 site files) of data in the meter at any one time. But through the infrared link, users can store an unlimited number of sites in a PC, and then upload the sites they will actually use.

  • Page 38: Entering The Program Menu

    [MENU] PT878 keypad. The Menu Bar replaces the Status Bar at the top of the screen. Press the [ ] arrow key once to scroll from the Site Menu to the Program Menu. At the Program Menu, press .

  • Page 39: Entering Transducer Parameters

    The first prompt asks you to select whether you are using a wetted or a clamp-on transducer. Use the [ ] and [ ] keys to scroll between the two types. Press to confirm the choice. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 40 Note: The choices made early in the Transducer and Pipe options determine the prompts available later. If the PT878 does not scroll to a particular parameter, it is not necessary for that transducer or pipe type. For example, the Lining window is not available if you select a wetted transducer.
  • Page 41 302 (Shear) 408 (Shear) 19 (Shear) 37 (Shear) 303 (Shear) 409 (Shear) 20 (Shear) 38 (Shear) 304 (Shear) 410 (Shear) 21 (Shear) 39 (Shear) 305 (Shear) 22 (Shear) 112 (Shear) 306 (Shear) Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 42: Parameters For Special Transducers

    The next prompt asks for Tw, the time delay. This parameter is actually the time the transducer signal spends travelling through the transducer and cable. The PT878 calculates the flow rate from the upstream and downstream transit times in the fluid, so the Tw (time delay) must be subtracted out for an accurate measurement.
  • Page 43 To change pipe information, see Entering Pipe Parameters on page 30. Transducer/Pipe * * * WARNING * * * Critical Angle Exceeded! Check Angles, Soundspeed!!!!!!!! Cancel Figure 12: High Angle Error Message Window Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 44 The valid range is from: 25.000 to 90.000 ° Cancel Figure 13: Low Angle Error Message Window Note: When the corrected information is entered, a message similar to Figure 14 appears. Press [F3] (OK). Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 45 0.964 inches ( 24.493 mm) Cancel Figure 14: Transducer Spacing Change Window The PT878 must also take into account the wedge temperature. From the Wedge Angle prompt, press the [ ] key to reach the Wedge Temperature prompt, and press...

  • Page 46: Confirming Entries

    [F2] or the key. [ESC] In either case, the PT878 returns to Operate Mode. 3.3 Entering Pipe Parameters To enter the Pipe option, scroll to the Pipe entry on the Program Menu and press . (From the Transducer window, you can scroll back up to the...
  • Page 47 Nylon, Polyethylene, Polypropylene, PVC Plastic (CPVC), or Acrylic Steel Carbon Steel or Stainless Steel Rolled Titanium None Tungsten Annealed, Carbide, Drawn Zinc Rolled Other* Any material Press to confirm the choice. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 48 Cancel Figure 16: Soundspeed Error Message Window Note: When the corrected soundspeed is entered, a message similar to Figure 17 on page 33 appears. Press [F3] (OK).to return to the Site Menu. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 49 PVC and CPVC), you have the option of entering the pipe dimensions by a standardized schedule. Once you enter the nominal pipe size and identification, the PT878 determines the OD and wall thickness from an internal table. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 50 Scroll to the desired [ENTER] schedule, and press to confirm the choice. [ENTER] After entering either diameter or schedule settings, pressing the [ ] key returns the meter to the Pipe Material prompt. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 51: Entering Pipe Lining Parameters

    (Cancel) [F2] or the key. [ESC] In either case, the PT878 returns to Operate Mode. • To return to the Pipe tab and scroll to other windows, press the [ ] key. 3.4 Entering Pipe Lining Parameters To enter the Lining option, scroll to the Lining entry on the Program Menu and press .
  • Page 52 Chapter 3. Programming Site Data 3.4 Entering Pipe Lining Parameters (cont.) The PT878 first prompts you to select the pipe lining material. Press to open the drop-down list of lining materials. [ENTER] Scroll to the appropriate material. If you do not see your lining material on the list, select “Other.”...

  • Page 53: Entering Fluid Types And Speeds

    (Default operation is “No.”) Use the [ ] and [ ] keys to scroll to the appropriate radio button. Press to confirm your selection. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 54 Depending on your selection, additional prompts may appear, as specified in Table 6 above. Press to confirm your selection. [ENTER] At the end of any sequence, pressing the [ ] key returns you to the Tracking Windows prompt. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 55: Entering The Signal Path Parameters

    The prompts available for the Path option depend on whether you have selected clamp-on or wetted transducers in the Transducer menu. (If the PT878 does not scroll to a particular parameter, it is not necessary for that transducer type.) Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 56: Path Parameters For Clamp-On Transducers

    Chapter 3. Programming Site Data 3.6.1 Path Parameters for Clamp-On Transducers Note: For wetted transducers, go to page 41. If you are using clamp-on transducers, the PT878 path menu includes two parameters: • Traverses • Spacing The PT878 first prompts for traverses, the number of times the ultrasonic signal crosses the pipe (see the Liquid Transducer Installation Guide (916-055) for more details).

  • Page 57: Path Parameters For Wetted Transducers

    Chapter 3. Programming Site Data 3.6.2 Path Parameters for Wetted Transducers If you are using wetted transducers, the PT878 path menu includes the following set of parameters: • Path Length • Axial Length The meter first prompts for the path length (P) of the ultrasonic signal.

  • Page 58: Entering The Energy Option Parameters

    Use the [ ] and [ ] keys to scroll to the appropriate radio button. Press [ENTER] to confirm your selection. Note: If you select “Disabled,” you cannot select any other prompt in this window. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 59 To confirm the entries and return to Operate mode, press (OK). The [F3] PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. The PT878 returns to Operate Mode. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 60: Entering Inputs In The Energy Option

    The first prompt asks if the temperature supply is fixed or active. Use the [ ] and [ ] keys to scroll to the appropriate radio button. Press to confirm your selection. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 61 The next prompt depends on whether you have selected a fixed or an active supply. • If you have selected a fixed supply, the PT878 asks for the desired temperature. Use the numeric keys to enter the desired temperature (in degrees C), and press to confirm the entry.

  • Page 62: Entering Custom Cp Data In The Energy Option

    Energy Options Custom Cp Energy Option Inputs Edit Table Custom Cp Fixed Density Source Table Static Density Edit Table Density Table Cancel Figure 23: Custom Cp Tab in the Energy Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 63 Figure 24: Custom Cp (temperature vs. enthalpy) Table Repeat steps b and c for the remainder of the table. When you have completed entering values, press (OK) to [F3] confirm the table and return to the Custom Cp window. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 64 3.7.2 Entering Custom Cp Data in the Energy Option (cont.) The next prompt asks from which source — a fixed value or table — the PT878 will use for fluid density values. Use the [ ] and [ ] keys to scroll to the appropriate radio button, and press [ENTER] The menu now varies, depending on your selection in step 2.
  • Page 65 To confirm the entries and return to Operate mode, press [F3] (OK). The PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. The PT878 returns to Operate Mode. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 66: Entering Analog Inputs

    The first prompt asks you to select whether the desired function is off or general purpose. Press to open the drop-down menu. [ENTER] Scroll to the desired response. Press to confirm your selection. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 67 When you have completed the label, press (OK) to confirm the [F3] label, or (Cancel) to leave the window without adding the label. [F2] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 68: Entering Analog Inputs In The Energy Option

    Figure 28 below. Analog Input Input A Input B Function Supply Temp Label Supply Temp Units °C Zero °C Span °C Cancel Figure 28: Analog Inputs Option Window - Energy Option Activated Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 69 To confirm the entries and return to Operate mode, press (OK). The [F3] PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. The PT878 returns to Operate Mode. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 70: Entering The Analog Output

    Scroll to the desired output from three choices: Off, 0-20 mA, and 4-20 mA. Press to confirm your selection. [ENTER] Note: If you select “Off,” you will not be able to access any other parameters in this option. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 71 The prompt then moves to a list of unit types. (The available units depend on the selection made at the Data Source prompt.) Scroll to the desired output unit. Press [F3] (OK) to confirm your selection. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 72 Use the numeric keys to enter the desired value. Press to confirm your selection. [ENTER] The last prompt, On Error, asks you to select how the PT878 will handle the analog outputs in the event of a fault condition. The meter offers three alternatives: •...

  • Page 73: Entering The Digital Output

    Low to High Cancel Figure 31: Digital Output Window The first prompt enables you to select the output function from five choices: • • Pulse Totalizer • Frequency • Test Points • Gate Input Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 74 The prompt asks for the units/pulse, the pulse width (in microseconds), and the polarity. (Figure 31 on page 57 illustrates a Digital Output window configured for the Pulse Totalizer function.) For the Units/Pulse and Pulse Width parameters: Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 75 These two windows can be used to trigger an oscilloscope to look at the receive signal output on another channel. Press to open the drop-down menu. [ENTER] Scroll to the desired signal. Press to confirm your selection. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 76 To confirm the entries and return to Operate mode, press (OK). The [F3] PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. The PT878 returns to Operate Mode. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 77: Entering User Functions

    The first prompt asks you to select the function number, 1 through 8. Press to open the drop-down menu. [ENTER] Scroll to the desired function number (User F1, User F2, etc.). Press to confirm the entry. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 78 Repeat this procedure for each letter or symbol you wish to add to the label. If you wish to delete a letter, press (Delete) to erase [F1] each letter or symbol, from right to left on the label. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 79 Note: Pressing causes the screen to alternate between a set of [SEL] symbols and functions and a list of user functions. Use both screens to create the desired function. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 80 User Function window. GE recommends pressing (Check) to test the validity of the [F2] function. The PT878 displays either “OK” or a message such as “Syntax Error.” • Press to delete the entire function, or [F1] •...

  • Page 81: Entering Correction Factors

    It makes a small adjustment to the flow rate reported by the PT878, based on the Kinematic Viscosity. Reynolds Correction is necessary, as the velocity of the fluid measured along a diametrical path must be related to the total area average velocity over the entire pipe cross-section.
  • Page 82 To confirm the entries and return to Operate Mode, press (OK). The [F3] PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 83: Entering A Calibration Factor

    3.11.3 Entering a Calibration Factor The Calibration Factor is used to calibrate or adjust the readings of the PT878 to another flow reference. To enter a Calibration Factor, return to the Reynolds Correction tab at the top of the Correction Factors option. Press the [ ] arrow key to reach the Calibration Factor window.
  • Page 84 The following steps depend on whether you select a single value or a table. If you entered Single: The prompt asks for a value. This feature enables a single multiplier to be applied to the flow rate reported by the PT878. Press to open the text box. [ENTER] Use the numeric keys to enter the desired value.
  • Page 85 Correction Factor table. This feature allows the user to “curve fit” velocity calibration multiple data points (from several different data sources or flow variables) to the flow rate reported by the PT878. Press to open the Data Source window.
  • Page 86 To confirm the entries and return to Operate mode, press (OK). The [F3] PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. The PT878 returns to Operate Mode. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 87: Chapter 4. Creating And Managing Sites

    Chapter 4. Creating and Managing Sites Chapter 4. Creating and Managing Sites As mentioned in Chapter 1, the PT878 can store site data in files for current and future access. (To learn how to program setup data, refer to Chapter 3, Programming Site Data.) After you answer the necessary questions, simply...

  • Page 88: The Site Manager

    Cancel Figure 39: Site Manager Window Note: Each PT878 comes preprogrammed with a basic site, Default, which serves as a basis for saving data and creating other sites. The right section of the screen supplies information for the site highlighted in the list on the left: its date, time and size, as well as the remaining amount of free memory.
  • Page 89 To transfer a site to a PC, go to page 83. • To transfer a site in text format, go to page 84. • To transfer a site from a PC to the PT878, go to page 85. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 90: Creating A New Site

    New Site Site 01 & Delete Cancel Figure 41: Name Entry Window for a New Site Use the four arrow keys to scroll to the desired letter or number, and press [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 91 Use the selected site ‘DEFAULT.SIT’ as a template? Figure 42: Template Confirmation Window The meter returns to Operate Mode, with the new site name displayed in the upper left corner of the screen. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 92: Opening An Existing Site

    [F2] • Press (Yes) to open the site. [F3] If you have changed the current site, the PT878 asks if you want to save the changes to the previously opened site. • Press (No) to cancel the changes, or [F2] •...

  • Page 93: Saving A Site

    (No) to cancel saving the site, or [F2] • Press [F3] (Yes) to save the site. The PT878 remains in the current window (Operate Mode or Site Manager), with the current site saved. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 94: Saving A Site With A Different Name

    (No) to cancel saving the site, or [F2] • Press [F3] (Yes) to save the site. The PT878 remains in Site Manager, with the current site saved under both the old and new names. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 95: Refreshing A Site

    When you have finished, • Press (Cancel) to erase the entry, or [F2] • Press (OK) to confirm the entry. [F3] PT878 remains in Site Manager, with the site listed under the new name. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 96: Deleting A Site

    , No, to cancel the deletion and return to the Site Manager, or [F2] • Press , Yes, to delete the site. [F3] The Site Manager appears, with the highlighted site now deleted. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 97: Creating A Site Message

    5111 bytes 118272 bytes free Refresh Exit Figure 48: Site Menu in the Site Manager Press to select “Message,” which opens the text creation [ENTER] window, shown in Figure 49 on page 82. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 98 When you have completed the message, press (OK) to confirm the [F3] message, or (Cancel) to leave the window without adding the message. [F2] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 99: Printing A Current Site

    PC that can receive data from the PT878 IR beam. Check that the Communications option on the PT878 (see page 123) has been set to the IrDA protocol, and that the IR beam on the PT878 has clear access to the IR sensor connected to the PC port.

  • Page 100: Transferring A Site File In Text Format To A Pc

    4.1.11 Transferring a Site File in Text Format to a PC To transfer a site file in text format from the PT878 to a PC, be sure the PC is equipped with an infrared sensor as discussed on page 83.

  • Page 101: Transferring A File From A Pc To The Pt878

    To download a site or meter file from a PC to a PT878: Check that the Communications option on the PT878 (see page 123) has been set to the IrDA protocol, and that the IR beam on the PT878 has clear access to the IR sensor connected to the PC port.
  • Page 102 Chapter 4. Creating and Managing Sites 4.1.12 Transferring a File from a PC to the PT878 (cont.) For Windows 95/98/2000: • Click on the Infrared icon in the System Tray of your PC, as shown in Figure 52 below. Figure 52: Infrared Icon in System Tray The Wireless Link window (for Windows 2000, shown in Figure 53 below) or the Infrared Transfer Application (for Windows 95/98) appears.
  • Page 103 Chapter 4. Creating and Managing Sites 4.1.12 Transferring a File from a PC to the PT878 (cont.) • From Windows Explorer, right-click on the selected file. Select Send Infrared Recipient or Nearby Computer. For Windows 2000, you can also drag the selected file to the Wireless Link icon, shown in Figure 54 below.

  • Page 104: Listing Files By Name

    File Menu to the Sort Menu, and scroll to the By Date option. Press . The Site Manager screen refreshes, [ENTER] with the sites listed in chronological order, from the most recent to the earliest. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 105: Chapter 5. Displaying And Configuring Data

    Chapter 5. Displaying and Configuring Data Chapter 5. Displaying and Configuring Data The PT878 allows you to view from one to four different measurement parameters simultaneously. The screen can show these parameters not only in numeric format, but as line or bar graphs as well.

  • Page 106: The Format Option

    Scientific format displays the value in mantissa and exponent format. Press to open the drop-down list of format choices. [ENTER] Scroll to the appropriate selection. Press to confirm your choice. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 107 [ENTER] • To confirm the entries and return to Operate mode, press (OK). [F3] • To leave the window without confirming the entries, press (Cancel) [F2] or the [ESC] key. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 108: The View Option

    Figure 58 below. 2000/11/30 09:53 AM ABC.SIT Velocity, ft/s Signal, dB 12.2 -0.6014 12.2 10 Seconds Volume, l/s Delta-T, ns 0.10 E0: No Errors Figure 58: Screen After Format Change Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 109: The Limits Option

    The screen appears similar to Figure 59 below. Set Line Graph Parameters Velocity Programming -12.2 Minimum Maximum 12.2 Seconds Use Lines Plot Average Value Show Minimum and Maximum Cancel Figure 59: Line (or Bar) Graph Parameters Window Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 110 [ENTER] When you have configured the graph, press (OK) to confirm the [F3] graph settings. The screen returns to Operate Mode, and displays any changes. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 111: The Measurement Option

    ] or [ ] arrow keys to select the desired measurement unit (or diagnostic parameter). Press (OK) to confirm the entry. [F3] The screen returns to Operate Mode, and displays any changes. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 112 Diagnostics Delta-T Delta-T Velocity Amplitude Up Volume Amplitude Down Fwd Totalizer T Up Rev Totalizer Power T Down Energy Gain Temperature Soundspeed P# Up No Unit Cancel Figure 60: Measurement Menu Window Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 113: Customizing The Display Screen

    To enter the Site Menu, press the key at the lower right of the [MENU] PT878 keypad. The Menu Bar replaces the Status Bar at the top of the screen. The Site Menu will be highlighted in the upper left corner. Press or the [ ] arrow key.

  • Page 114: Specifying The Number Of Displayed Parameters

    Chapter 5. Displaying and Configuring Data 5.5.1 Specifying the Number of Displayed Parameters As mentioned earlier, the PT878 can display one to four different measurement parameters simultaneously. However, sometimes you might wish to display only one or two parameters. To change the number of open...

  • Page 115: Customizing Softkeys

    ] arrow keys to move to the desired FKey (1, 2 or 3) entry on the menu. Press . The Configure FKey window opens, [ENTER] as shown in Figure 64 on page 100. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 116 Press the desired softkey. A window appears with the question, “Assign current menu command to FKeyX?” Press (Yes) to confirm the assignment and close the window. (Press [F3] (No) to close the window without changing the key.) [F2] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 117 Configure FKey window, by selecting (Clear) as an entry, pressing [ENTER] and then [F3] (OK). Note: Since the customized softkeys are saved globally, they will remain, even if you change site files. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 118: Managing Files - The Drive Manager

    Refresh Exit Figure 66: Drive Manager Window The window on the left lists all the meter, site and log files in the PT878, while the window on the right displays information on the file highlighted in the left window. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 119 Then press to open the File Menu, and scroll to [MENU] the appropriate option, as shown in Figure 67 above. Press . The [ENTER] PT878 then performs the desired action with the file. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 120: Transferring A File To A Pc

    To upload a log, meter, bitmap or site file to a PC: Check that the Communications option on the PT878 (see page 123) has been set to the IrDA protocol, and that the IR beam on the PT878 has clear access to the IR sensor connected to the PC port.

  • Page 121: Transferring A File From A Pc To The Pt878

    Once you have stored site or meter files to a PC, you can then transfer them back to the PT878 over the IR interface. The PT878 only accepts files with a .sit (site) or .met (meter) extension. If you try renaming another type of file with a .sit or .met extension and transfer it, it will be transferred, but it will...
  • Page 122 Chapter 5. Displaying and Configuring Data 5.6.2 Transferring a File from a PC to the PT878 (cont.) QuickBeam opens a window indicating that it is downloading the file. When the download is complete, the meter returns to the Drive Manager. If you close and reopen the Drive Manager, the file appears as one of the listed sites.

  • Page 123: Refreshing A File

    While sending or receiving files, the PT878 continues to perform measurements, but at a slower rate than normal. 5.6.3 Refreshing a File To refresh a file so that the PT878 displays the most recent information, you have two options: •...

  • Page 124: Deleting A File

    , No, to cancel the deletion and return to the File Manager, or [F2] • Press , Yes, to delete the site. [F3] The File Manager appears, with the highlighted site now deleted. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 125: Listing Files By Name

    File Menu to the Sort Menu, and scroll to the By Date option. Press . The Site Manager screen refreshes, with [ENTER] the sites listed in chronological order, from the most recent to the earliest. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 126: Accessing Meter Data -The About Option

    5.7 Accessing Meter Data —The About Option The About option displays useful information concerning the model number and software version of any given PT878. While the window normally appears briefly at startup, users might want to access the information for a longer period.

  • Page 127: Chapter 6. Programming Meter Settings

    Chapter 6. Programming Meter Settings Chapter 6. Programming Meter Settings Along with display formats and site data, PT878 users can program global settings for the meter that suit their individual preferences. The global settings include: • English or Metric measurement units •...

  • Page 128: Entering The Meter Menu

    [MENU] PT878 keypad. The Main Menu replaces the Status Bar at the top of the screen. Press the [ ] arrow key twice to scroll from the Site Menu to the Meter Menu. At the Meter Menu, press .

  • Page 129: Selecting Measurement Units

    6.2 Selecting Measurement Units The first option, Units, enables you to select either English or Metric units as global measurement units for the PT878. The selected units then become the default settings for every measurement that has the option for metric/English units.

  • Page 130: The Battery Charger

    Note: When conditioning the batteries, be sure you have plugged the AC adapter into the PT878 and pressed the power key. NiMH batteries normally do not require conditioning. To open the option window:...

  • Page 131: Entering Date And Time

    This box displays the current meter date. Press to enter the text window. The meter highlights the center [ENTER] number. Use the [ ] and [ ] keys to scroll to any number you wish to change. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 132 To confirm the entries and return to Operate mode, press (OK). The [F3] PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. The PT878 returns to Operate Mode. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 133: Changing Date And Time Appearance

    Display Options Display Locale Separators: Time Date Decimal Date Format MM/DD/YYYY Time Format 12 Hour Date/Time, Decimal Formats: MM/DD/YYYY HH:MM:SS PM, 123.45 Cancel Figure 79: Format Tab in the Display Options Window Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 134 ] arrow keys to scroll to the desired format. Press to confirm your entry. [ENTER] The PT878 now asks you to select whether you want the time presented in a 12-hour format (for example, 11:53:23 PM) or in a 24-hour format (23:53:23). Press to open the drop-down menu.
  • Page 135 A line at the bottom, the Date/Time, Decimal Formats, displays how the format and separator selections will appear on the screen. Pressing the [ ] arrow key returns the PT878 to the Locale tab. • To confirm the entries and return to Operate mode, press (OK).

  • Page 136: Adjusting The Contrast

    Chapter 6. Programming Meter Settings 6.6 Adjusting the Contrast For more comfortable viewing in a particular environment, the PT878 enables you to adjust the screen contrast. To adjust the screen contrast: From the Meter menu, scroll to the Contrast entry and press...

  • Page 137: Setting Backlight Timeout

    6.7 Setting Backlight Timeout By using the Backlight Timeout option, you can set a specified time that the PT878 backlight will remain on before turning itself off. Automatic turnoff enables the PT878 to conserve battery power. To set the backlight timeout:...

  • Page 138: Changing The Display Language

    To use this option, you must have previously loaded a language translation file into the PT878. The PT878 offers the selection of several languages for its display. To change the display language: From the Meter menu, scroll to the Language entry and press...

  • Page 139: Changing Communications Settings

    6.9 Changing Communications Settings On occasion, you might need to change the parameters by which the PT878 communicates with a PC over the wireless infrared interface. While programming, see Figure 153 on page 237 of Appendix A, Menu Maps. To check or change these parameters: Transport®...
  • Page 140 You must use IrDA when using an IR printer or transfer application such as QuickBeam. Use the [ ] and [ ] keys to scroll to the desired selection, and press [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 141 To confirm the entries and return to Operate Mode, press (OK). The [F3] PT878 returns to Operate Mode. • To leave the window without confirming the entries, press (Cancel) [F2] or the key. The PT878 returns to Operate Mode. [ESC] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 142: Resetting Forward And Reverse Totals

    ] or [ ] arrow keys to choose the total to be reset. Press to reset the total(s). [ENTER] The meter resets the selected total(s) to 0.0 and returns to Operate Mode. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 143: Setting Up User Tables

    The first prompt asks you to select the table to be programmed. Press to open the drop-down menu. [ENTER] Use the [ ] or [ ] arrow keys to scroll to the table you wish to program. Press to confirm the entry. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 144 (OK) to confirm the [F3] label, or (Cancel) to leave the window without adding the label. [F2] Note: It is not necessary to enter the “#Data Points” or “Max Points” text boxes. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 145 Repeat steps b, c and d on the previous page 129 until you have completed entering data for the table. When you have finished, press (OK) to confirm the entries or [F3] (Cancel) to leave the window without confirming the table. [F2] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 146: Taking A Bitmap Capture Of A Current Screen

    The program now varies, depending on whether you selected printer or file capture. • If you selected To Printer, the PT878 shows a message indicating that its infrared sensor is looking for a receiving printer. (If the sensor spots no printer, a window appears indicating that it cannot find a device.

  • Page 147: Chapter 7. Logging Data

    Chapter 7. Logging Data Chapter 7. Logging Data A powerful and flexible feature of the PT878 is data logging. The meter enables you to choose up to 12 parameters to log. You can also select the start time and date, end time and date, and time interval. Logs can run one at a time or simultaneously.

  • Page 148: Entering The Logging Menu

    [MENU] PT878 keypad. The Main Menu replaces the Status Bar at the top of the screen. Press the [ ] arrow key three times to scroll from the Site Menu to the Logging Menu. At the Logging Menu, press .

  • Page 149: The Log Manager

    The cursor [MENU] highlights the File Menu in the upper left corner. Use the [ ] and [ ] keys to scroll to the desired menu, and press to open the menu. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 150: The File Menu

    S:03/01/01 13:13:41 Delete E:03/01/01 13:23:41 Delete All Logs? Interval: 10 Seconds Records:51 Refresh Print 03/01/01 13:23:21 Transfer 1216 bytes 109568 bytes free Refresh Exit Figure 90: File Menu in the Log Manager Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 151: Setting Up A New Log

    (OK) to confirm the entry. Create New Log & Cancel Delete Figure 91: New Log Window The PT878 now asks for log formatting and measurements. The screen appears similar to Figure 92 on page 136. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 152 The next prompt asks you to choose whether the log is to be a standard or error log. Use the [ ] and [ ] keys to scroll to the appropriate radio button. Press to confirm your selection. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 153 ] key to return to the General tab. Finally, press the [ ] key to move to the Measurements tab, and press . The Measurements window appears similar to [ENTER] Figure 93 on page 138. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 154 Figure 93: Log Measurements Window To step through each entry, press the [ ] key. Press to open the first entry. The Select Measurement window [ENTER] opens, as shown in Figure 94 on page 139. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 155 (Activate) to confirm the entries and start the log. [F3] If you started the log from the New Log option, the PT878 returns to Operate Mode, with a Pencil icon in the System Tray; if you started it from within the Log Manager, the meter returns to the Log Manager.

  • Page 156: Copying (Cloning) A Selected Log

    [F2] (Cancel) to cancel the log or (Activate) to confirm and start the new [F3] log. The PT878 returns to the Log Manager, which now displays the status of the cloned log. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 157: Renaming A Log

    (OK) to confirm the name. [F3] The PT878 returns to the Log Manager, which highlights the renamed log. 7.3.4 Deleting a Log To delete a log: First, select the log you wish to delete in the Log Manager (shown in Figure 89 on page 133)).

  • Page 158: Deleting All Logs

    Log Manager. Then open the File Menu, scroll to the Refresh option, and press . The screen [ENTER] momentarily blanks, and then reappears with the most current information on the highlighted log. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 159: Printing A Log

    In either case, press to confirm the entry. [ENTER] Repeat step 2 for any other entries you wish to change. When you have finished, press (OK) to confirm the entries and close the [F3] window. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 160: Transferring A Log To A Pc

    To upload a log to a PC: Check that the Communications option (see Appendix F) has been set to the IrDA protocol, and that the IR beam on the PT878 has clear access to the IR sensor connected to the PC port.

  • Page 161: The Log Menu

    Pause All Logs Interval: 10 Seconds Start All Logs Records:51 End All Logs 03/01/01 13:23:21 View All Sites 1216 bytes 109568 bytes free Refresh Exit Figure 97: Log Menu in the Log Manager Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 162: Stopping (Pausing) A Log

    Figure 89 on page 133). Then open the Log Menu, scroll to the Pause option, and press [ENTER] The PT878 returns to the Log Manager, which displays the highlighted log with “Paused” in the State line. 7.4.2 Restarting a Log...

  • Page 163: Stopping All Logs

    . Logs are associated with the site in use at the [ENTER] time the log is created. Thus, when another site is in use, the PT878 automatically starts different logs. By default, the Log Manager only displays the logs created with the current site. View All Sites allows the Manager to list logs for all sites.

  • Page 164: The View Menu

    Log Manager File View Sort Details Info: AAA.LOG Graph State: Finished Spreadsheet S:03/01/01 13:13:41 E:03/01/01 13:23:41 Interval: 10 Seconds Records:51 03/01/01 13:23:21 1216 bytes 109568 bytes free Refresh Exit Figure 98: View Menu Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 165: Displaying Log Details

    Records:51 Precision: 8 Error:No (Basic) Velocity: Meters/sec Exit Figure 99: Log Details Display Window - List of Measurements in Log Press (Cancel) or (OK) to return to the Log Manager. [F2] [F3] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 166: Displaying Log Data In Graphical Form

    (Scale) and go to page 151. [F1] • If you wish to alter the time scale, press [F2] (Time) and go to page 152. • To leave the window, press (Exit). [F3] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 167 [ENTER] If you select Max or Range for limits, you have finished entering data in this form. If you select Set, the PT878 asks for minimum and maximum limits. Press the [ ] key to reach the Minimum text box.
  • Page 168 Repeat step 2 for any other entries you wish to change. When you have finished, press (OK) to confirm the entries and close [F3] the window, or press (Cancel) to leave the window without changing [F2] the entries. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 169: Displaying Log Data In Spreadsheet Form

    (shown on page 152) opens. Follow the instructions on page 152 to change the date or time. • To refresh the display, press [F2] (Refresh). The display shows the most current data. • Press (Exit) to return to the Log Manager. [F3] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 170: The Sort Menu

    File Menu to the Sort Menu, and scroll to the By Date option. Press . The Log Manager screen refreshes, with the sites listed in chrono- [ENTER] logical order, from the most recent to the earliest. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 171: Chapter 8. Servicing The Pt878

    Chapter 8. Servicing the PT878 Chapter 8. Servicing the PT878 For user convenience, the PT878 offers a Service Menu. This menu enables users to perform a variety of functions that they might occasionally require: • print out reports • set up and view the thickness gauge measurements •...

  • Page 172: Entering The Service Menu

    [MENU] PT878 keypad. The Menu Bar replaces the Status Bar at the top of the screen. Press the [ ] arrow key four times to scroll from the Site Menu to the Service Menu. At the Service Menu, press .

  • Page 173: Printing Reports

    Chapter 8. Servicing the PT878 8.2 Printing Reports When used with an IR-compatible printer, the PT878 can print out a variety of data (current site, logs, drive contents, and user functions, tables, and settings) in the Reports option. To enter the Reports option, scroll to the Reports entry on the Service Menu and press .
  • Page 174 Chapter 8. Servicing the PT878 8.2 Printing Reports (cont.) Figure 107: Printout of a Typical Drive Report Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 175: Setting Up The Thickness Gauge

    Chapter 8. Servicing the PT878 8.3 Setting up the Thickness Gauge For greatest accuracy in flow applications, the PT878 can measure pipe wall thickness using an optional thickness gauge transducer, instead of relying on the nominal pipe wall thickness. In Thickness Gauge mode, the PT878 does not measure flow, but it can determine the thickness of most standard metal and plastic pipe materials over a range from 0.05 to 3 in.

  • Page 176: Measuring Pipe Wall Thickness

    Press to open the list. [ENTER] Use the [ ] or [ ] arrow keys to scroll to the desired material. Press to confirm your selection. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 177 • Press [F2] (Cancel) to return to Operate Mode without confirming the soundspeed value. • Press (OK) to confirm the new value. The PT878 returns to [F3] Operate Mode. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 178: Measuring Thickness In Numeric Format

    Be sure the “Noise” or “Los” (loss of signal) boxes do not appear. Press [F2] (Cancel) or (OK) to return to Operate Mode, or press the [ ] arrow key [F3] to move to another window in the option. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 179: Displaying The Receive Signal In Graphical Format

    However, if you wish to adjust the graph, press the [ ] key. The screen now appears similar to Figure 111 on page 164. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 180 Press [ ] and [ ] to move the selected cursor left and right. • Press [ ] to select the graph. • Press [ ] to return to tab navigation. • Press to return to Operate Mode without saving the calibration [ESC] changes. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 181: Calibrating The Thickness Gauge Transducer

    For single-point calibration, complete the following procedure, but skip steps 6, 7 and 8. See Appendix D for more information. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 182 Use the [ ] and [ ] arrow keys to move to the Dual radio button and press [ENTER] The next prompt asks you to enter the length of Block 1. (If you are using a GE-supplied test block, the length is printed on the block.) Press to open the text box. [ENTER] Use the numeric keys to enter the length.
  • Page 183 Chapter 8. Servicing the PT878 Dual-Point Calibration (cont.) IMPORTANT: Be sure to hold the transducer steady until the GE wait cursor disappears. Use the [ ] key to return to the Zero tab, and then scroll to the Display tab (page 162) to confirm the block length within ±0.002. If the measurement is not within this limit, recalibrate the transducer offsets.

  • Page 184: Calculating Velocity (Pipe Material Soundspeed)

    Thickness Gauge Measure Velocity Graph Zero Material Display Block Length Determine the Sound Speed Calculated Current Cancel Figure 113: Soundspeed Window Scroll to the Velocity tab as shown in Figure 113 above. Press [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 185 (Set button) to start the calibration sequence. [ENTER] Thickness Gauge Measure Display Velocity Graph Zero Material Block Length Press Set to Commit Value Current 22129. 74733. Calculated Cancel Figure 114: Velocity Window - Calculated and Current Values Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 186: Programming The Thickness Gauge

    Chapter 8. Servicing the PT878 8.4.5 Calculating Velocity (Pipe Material Soundspeed) (cont.) The “Calculated” box shows the thickness value measured. The PT878 asks for confirmation of the calculated and current values. Press to commit the calculated value, or to recalculate the value.
  • Page 187 To change this value: Press [ENTER] to open the text box. Use the numeric keys to enter the desired value. Press to confirm your entry. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 188 [ENTER] The final value, the detection threshold, represents the percent of peak the PT878 uses to make measurements. It will consider anything above the entered percentage as part of the signal. To change this value: Press to open the text box.

  • Page 189: Displaying Diagnostic Parameters

    Figure 116: Diagnostics Window Press (Cancel) or (OK) to close the window and return to Operate [F2] [F3] Mode. Note: For an explanation of diagnostic parameters, refer to Chapter 9, Diagnostics and Troubleshooting. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 190: Calibrating The Analog Output And Inputs

    The analog outputs have a resolution of ±5.0 µA. Press the [ ] arrow key to enter the Analog Output window. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 191 Input tab. • Press [F2] (Cancel) to return to Operate Mode without confirming the changes. • Press (OK) to confirm the new data. The PT878 returns to Operate [F3] Mode. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 192: Calibrating Inputs

    The next prompt asks for the value to which you want to set the low input (0 or 4 mA). Press to open the text box. [ENTER] Use the numeric keys to enter the desired value. Press to confirm your entry. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 193 Outputs tab. • Press [F2] (Cancel) to return to Operate Mode without confirming the changes. • Press (OK) to confirm the new data. The PT878 returns to [F3] Operate Mode. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 194: Setting Up Signal Parameters

    . The screen appears similar to Figure 119 below. [ENTER] Signal Setup Signal Para Peak Detect Pulse/Code Delta-T Offset Transmit Sample Size 0 m/s Zero Cutoff Velocity Averaging Errors Allowed Cancel Figure 119: Signal Parameter Window Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 195: Setting Up Signal Parameters

    [ENTER] The next prompt asks for the zero cutoff. Near “zero” flow, the PT878 may have fluctuating readings due to small offsets (caused by factors such as thermal drift in the fluid). The zero cutoff causes velocity measurements less than the cutoff to be reported as zero.
  • Page 196 Peak Detection tab. • Press (Cancel) to return to Operate Mode without confirming the [F2] changes. • Press (OK) to confirm the new data. The PT878 returns to [F3] Operate Mode. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 197: Setting Up Peak Detection

    Chapter 8. Servicing the PT878 8.8.2 Setting up Peak Detection The PT878 can use two different methods to identify the peak of the received signal. In the “Peak” method, the peak is identified by testing a derivative of the signal. In the “Threshold” method, the peak is identified as the point where the signal crosses a threshold that is a percentage of the maximum signal detected.
  • Page 198 Signal Parameter tab. • Press (Cancel) to return to Operate Mode without confirming the [F2] changes. • Press (OK) to confirm the new data and return to Operate Mode. [F3] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 199: Selecting The Transmit Code

    8.8.3 Selecting the Transmit Code The Pulse/Code tab allows users to select the transmit code used by the PT878 to make measurements. The default option, “Auto,” directs the meter to select the optimal code, based on the pipe size. From the Signal Parameter tab, press the [ ] arrow key twice to move to the Pulse/Code tab, as shown in Figure 121 below.

  • Page 200: Setting Error Limits

    Figure 122: Signal Error Limits Option The first prompt asks for the minimum and maximum limits for the transducer signal received by the PT878. The default values are 40 for minimum and 85 for maximum. The E1: LOW SIGNAL error message appears if the signal strength falls below the limit programmed here.
  • Page 201 The third prompt calls for the low and high limits for the amplitude discriminator. The discriminator measures the size of the transducer signal sent from the PT878. If the signal falls outside these limits, the E5: AMPLITUDE ERROR message appears. Repeat Step 1 on page 184 to enter the desired limits.
  • Page 202 Chapter 8. Servicing the PT878 8.9.0 Setting Error Limits (cont.) Note: In the velocity and acceleration boxes, if the PT878 currently displays metric measurements, the F1 softkey displays the word “English.” If it displays English measurements, the F1 softkey displays “Metric.” Press...

  • Page 203: The Test Option

    8.10 The Test Option Within the Service Menu, the Test option includes seven tests to ensure that the PT878 is performing properly: Test Screen, Test Keys, Watchdog Test, Impulse Response, Wave Snapshot, Simulate and Battery Test.To enter this option, scroll to the Test entry on the Service Menu and press .

  • Page 204: Testing The Screen

    Chapter 8. Servicing the PT878 8.10.1 Testing the Screen To test the proper functioning of the PT878 screen, scroll to the Test Screen option in the Test Menu and press [ENTER] . The screen then shows the message, “Press Any Key To Continue.” Once you press a key, a screen with a checkerboard pattern appears, as shown in Figure 124 below.

  • Page 205: Testing The Keys

    Figure 125: Test Keys Window Pressing the key returns the meter to the Operate Mode. If any key does [F3] not appear on the screen, contact the factory. Note: The power key does not appear. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 206: Testing The Watchdog Timer Circuit

    (No) to cancel the test and return to the Menu screen, or press [F2] [F3] (Yes) to start the test. The PT878 should go blank for a few seconds, and then restart. If it does not follow this sequence, consult the factory. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 207: Setting Impulse Response

    The first prompt asks in which direction you wish the meter to transmit, upstream or downstream. Press [ENTER] to open the drop-down list. Use the [ ] or [ ] arrow keys to scroll to the desired number. Press to confirm your selection. [ENTER] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 208: Taking Wave Samples For Diagnosis

    Refer to page 104 for information on transferring a file to a PC. 8.10.6 Applying a Stored Signal for Diagnosis The Simulate option places the PT878 in a mode in which it uses a stored signal (instead of the live signal from the transducers) to make flow calculations for diagnostic purposes.

  • Page 209: Testing The Battery

    Figure 128: Battery Test Option The screen displays current status (Fast Charge, On Charge, Discharging, or On Battery), the time remaining for the PT878 to run on the battery, the time for the Fast Charge, and the current condition of the backup battery.

  • Page 210: Resetting To Factory Default Parameters

    Chapter 8. Servicing the PT878 8.11 Resetting to Factory Default Parameters For various reasons, you might wish to return the PT878 to its original settings. The Factory Defaults option enables you to return the meter to its preprogrammed default settings. To enter the option, scroll down to the Factory Defaults entry in the Service Menu and press .

  • Page 211: Updating Pt878 Software

    Chapter 8. Servicing the PT878 8.12 Updating PT878 Software By using a Windows-based PC with an infrared adapter, PT878 users can update the meter’s operating software without the need to change the hardware. This software can include the bootloader, FPGA software (timing software for transit-time), instrument software, the meter string file and the Help string file.

  • Page 212: Updating Software Via Irobex

    (OK) to confirm that you wish to erase the program. The meter asks for confirmation. Repeat the options shown in Step 1 above. After the PT878 reboots, the screen appears similar to Figure 131 below. Panametrics PCI Loader v3.0 2/26/02...

  • Page 213: Updating Software Via Ircomm

    IrCOMM, Windows 2000 and XP do not. Refer to Appendix F. Before you install new coding, you must be sure that the PC has the correct protocols to transmit the software to the meter. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 214 Infrared Monitor in the Control Panel and clicking on the Options tab.It displays the message, “Providing Application Support on:” and lists the virtual infrared port, as shown in Figure 132 below. Figure 132: Port Settings for COMM 4 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 215 As shown in Figure 133 above, the Flash Update option erases all instrument coding. • Press (Cancel) to return to Operate Mode without erasing the [F2] program. • Press (OK) to confirm that you wish to erase the program. [F3] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 216 Chapter 8. Servicing the PT878 8.12.2b Installing New Software (cont.) The meter asks for confirmation. Repeat the options shown in Step 1 above. The screen on both the PC and the PT878 now appears similar to Figure 134 below. GE Sensing PCI Loader [HW Rev3+] v3.0 2/26/03...
  • Page 217 From the Protocol drop-down menu, select Xmodem. Click Send. For a successful transfer, the PC window appears similar to Figure 136 on page 201, while the PT878 screen displays the program ID, size, load address and a count of blocks being loaded.
  • Page 218 Chapter 8. Servicing the PT878 [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 219: Chapter 9. Diagnostics And Troubleshooting

    This section describes error messages, diagnostic parameters, and shows you how to isolate problems to one of the following areas: • Electronics, including programmed values • Flowcell, which includes the pipe and fluid • Transducers and cables. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 220: Error Code Messages

    See Flowcell Problems on the Program Menu Measurement is very page 208 and Transducer Pipe option, as different from the Problems on page 210. described in programmed Check programming and Chapter 5.) soundspeed. transducer spacing. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 221 Check that output load is within specification <550 ohm. Temperature Input Supply temperature Check cable and transmitter. Supply input out of range. Temperature Input Return temperature Check cable and transmitter. Return input out of range. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 222: Displaying Diagnostic Parameters

    Chapter 9. Diagnostics and Troubleshooting 9.2 Displaying Diagnostic Parameters As part of its measurement menu, the PT878 offers a list of diagnostic parameters to aid in troubleshooting in the event of flowcell, transducer, or electrical problems. You can select any diagnostic parameter for display as a measurement as discussed in Chapter 5, Displaying and Configuring Data, on page 95.
  • Page 223 Displays the density for the return input. (Energy measurement.) DELTh Displays the delta enthalpy, or difference between the supply and return enthalpy (enthalpy is a measure of energy contained in the fluid.) (Energy measurement.) Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 224: Flowcell Problems

    However, if you are measuring a fluid that is considerably different from the fluid programmed into the TransPort, you may have to adjust the meter for the new fluid. Refer to Chapter 3, Programming Site Data, on page 37. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 225: Pipe Problems

    THE PIPE OR FLOWCELL DIMENSIONS MUST BE ACCURATE. The accuracy of your flow measurements will be no better than the accuracy of your programmed pipe or flowcell dimensions. If GE did not supply your flow cell, the dimensions you program must be consistent with the required flow accuracy.

  • Page 226: Transducer Problems

    To check for damage, remove the transducer from the flow cell. If the wetted end of the transducer is rough and pitted, the transducer may have to be replaced. GE can supply suitable transducer materials for most fluids. Contact the factory for information on special transducers.

  • Page 227: Clamp-On Transducer Problems

    The crystal itself can also be damaged by the same conditions. The internal wiring can be corroded or shorted if contaminants enter the transducer housing. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 228: Relocating Transducers

    Move one transducer about 1/2 inch (12.7 mm) closer to the other transducer. If this resolves the problem, you must modify the “S” dimension programmed into the PT878 by using the following steps: Press [MENU]. Scroll to the Program menu and press...

  • Page 229: Chapter 10.Specifications

    10.1.4 Flow Accuracy (Velocity, % of reading): Clamp-on Transducers: Pipe Diameter > 150 mm (6 in.) ±1% to 2% of reading typical Pipe Diameter ≤ 150 mm (6 in.) ±2 to 5% of reading typical Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 230: Electrical

    Battery Life: 9-11 hours of continuous operation is typical Battery Charger: Input: 100-250 VAC, 50/60 Hz, 0.38 A Memory: 1 MB datalog/site battery-backed RAM 1 MB program FLASH memory Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 231 ® Acoustic: One pair of LEMO coaxial transducer connectors Cable and length: Cable length 8 m (25 ft) standard. Up to 305 m (1000 ft) optional with extension cables. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 232: Operational Specifications

    Graphic displays shows flow in numeric or graphical format. Also displays logged data. Supports multiple languages: English, French, German, Japanese, Spanish, (Castilian and South American), Italian, Portuguese, Dutch, Russian and Swedish. Totalizers: Pulse or frequency totalizer output. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 233: Transducer

    All metals, most plastics; consult GE Sensing for concrete, composite materials and highly corroded or lined pipes Pipe Sizes: 12.7 mm to 7.6 m outside (OD) (0.5 to 300 in.) Pipe Wall Thickness: Up to 75 mm (3 in.) Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 234: Available Options

    Infrared adapter plugs into any available serial port to give desktop PCs infrared capability Printer Option Thermal printer with rechargeable battery and 120 to 240-VAC power supply/recharger PC Interface Software PanaView™ Instrument Interface Software Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 235 Meter Menu - Figure 140 on page 223 • Communications Option - Figure 153 on page 237. • Logging Menu - Figure 141 on page 224. • Service Menu - Figure 142 on page 225 • Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 236 Appendix A. Menu Maps [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 237 Name Transfer Refresh Delete File Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 138: Site Menu Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 238 Note: Press [F2] (Cancel) to cancel the entries and return to Menu. (1/2 to 48) Press [F3] (OK) to confirm the entries and return to Menu. Figure 139: Program Menu with Pipe Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 239 Date Separator Communications See Figure A-17 Table Time Separator Decimal # Data Points Max Points Edit Tables Date Format YYYY/MM DD/MM MM/DD Time Format 12 Hour 24 Hour Figure 140: Meter Menu Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 240 Delete Delete All Print Print All Transfer Name Name Name Name Name Format Format Linear Circular Linear Circular Type Type Standard Standard Error Error Start Start Interval Interval Measurement Measurement Figure 141: Logging Menu Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 241 (If Other) Block 1 Length Block 1 Sound Speed Retry Length Block 2 Length Retry Drive Contents Current Site Global Settings User Functions User Tables User Settings Menu Commands Figure 142: Service Menu Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 242 Appendix A. Menu Maps Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 243 Wedge Temperature Wedge Sound Speed Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 143: Transducer Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 244 Cement (Pyrex) Sound Speed Thickness Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 144: Lining Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 245 Tracking Windows (If Energy Option Enabled) Other Water Meth Freon Water Water Other 25 260 Sea 22 Crud Lube Speed Speed Sound Speed Water/ Water Glycol Glycol % Figure 145: Fluid Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 246 Path Length Traverses Axial Length Spacing Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 146: Path Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 247 Temperature Return Fixed Active Temperature Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 147: Energy Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 248 Label Units Zero Span Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 148: Analog Input Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 249 Force Low Force High Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 149: Analog Output Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 250 High/Low Duty Cycle % Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 150: Digital Output Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 251 Units Symbol Decimal Places Equation Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 151: User Functions Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 252 Edit Table Edit Table Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 152: Correction Factors Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 253 Even Stop Bits Data Bits Note: Press [F2] (Cancel) to cancel the entries and return to Menu. Press [F3] (OK) to confirm the entries and return to Menu. Figure 153: Communications Option Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 254 Appendix A. Menu Maps [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 255: Appendix B. Measuring P And L Dimensions

    Appendix B. Measuring P and L Dimensions Appendix B. Measuring P and L Dimensions If you are using wetted transducers, the PT878 requires you to enter the path length (P) and the axial dimension (L). P is the transducer face-to-face distance, and L is the axial projection of P in the flow stream.
  • Page 256 Use Figure 155 below to properly measure the coupling length. Typically, the transducer face is positioned just outside the inside diameter (ID) of the pipe, or slightly retracted inside the coupling. ° Figure 155: Determining the Pipe Coupling Length Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 257 (CL) = 2.0” • a transducer face depth (FD) = 1.75” • mounting angle (MA) = 45° The P dimension would be: [48 + 2(3/8)]/(0.7071) + 2(2.0-1.75) = 69.4” Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 258 Appendix B. Measuring P and L Dimensions [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 259: Appendix C. Temperature Transmitter Installation

    The PT878 requires a supply and return temperature input to measure energy rate and consumption. You must connect the temperature sensors to a 4 to 20 mA transmitter (powered by the PT878 or externally) and then from the transmitter to the PT878 (a special GE cable is required to make transmitter-to-PT878 connections).

  • Page 260: Mounting Rtds On The Pipe

    Crimp the strap closed to secure the feeder buckle in place. Repeat steps 1 through 7 for the remaining RTD and clamping fixture. When you have completed assembly, proceed to the next section to fasten the RTD to the pipe. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 261: Mounting The Rtd To The Pipe

    Proceed to the following section to make electrical connections. C.3 Making Electrical Connections The PT878 will not accept a signal directly from the RTD; therefore, you must have some type of 4 to 20-mA transmitter. The factory supplies a dual transmitter (DTR) with a special LEMO connector that attaches to the PT878.

  • Page 262: Connecting The Rtd To The 4 To 20-Ma Transmitter

    RTDs should have two common leads and one signal lead. If you are using a GE RTD, the wire colors may vary; however, two of the RTD wires will be the same color. The wires that are the same color are the common leads and the remaining wire is the signal lead.

  • Page 263: Connecting The Transmitter To The Pt878

    Appendix C. Temperature Transmitter Installation C.3.2 Connecting the Transmitter to the PT878 If you are using the GE DTR, simply plug the LEMO connector into the I/O connector as shown in Figure 156 below. Transducer Upstream Downstream Power Infrared Transceiver...
  • Page 264 Appendix C. Temperature Transmitter Installation [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 265: Appendix D. Ultrasonic Thickness Gauge Theory Of Operation

    With a dual, the receiver element is unlikely to pick up this false echo. Finally, duals may be designed for high temperature measurements that would damage single element contact transducers. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 266: Factors Affecting Performance And Accuracy

    As with any difficult application, experimentation with actual product samples is the best way to determine the limits of a particular gauge/transducer combination on a given surface. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 267: Transducer Positioning/Alignment

    Generally, an inability to obtain a valid thickness reading at a particular point on a test specimen could be a sign of a seriously degraded wall which may warrant investigation by other means. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 268: Calibration

    In many organic materials, such as low density plastics and rubber, sound is attenuated very rapidly at the frequencies used in normal ultrasonic thickness gaging. Therefore, the maximum thickness that can be measured in these materials is often limited by sound attenuation. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 269: Appendix E. Material Safety Data Sheet For Couplant

    Health......0 Flammability....0 Reactivity......0 E.2 Hazardous Ingredients This material does not contain any ingredients having known health hazards in concentrations greater than 1%. This material does not contain any known or suspected carcinogens. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 270: Physical Data (Nominal)

    Unusual Fire and Explosion Hazards: none E.5 Reactivity Data Stability: stable Conditions to Avoid: none Incompatibility (Materials to Avoid): none known Hazardous Polymerization: will not occur Hazardous decomposition or Byproducts: none known Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 271: Health Hazard And First Aid Data

    Steps to be taken in case material is released or spilled: Pick up excess for disposal. Clean with water. Waste disposal method: Dispose of in accordance with federal, state, and local regulations. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 272: Control Measures

    Appendix E. Material Safety Data Sheet for Couplant E.8 Control Measures Respiratory Protection: not required Ventilation: not required Protective Gloves: on individuals demonstrating sensitivity to SOUNDSAFE® Eye Protection: as required by working conditions Other Protective Equipment: not required Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 273: Appendix F. Establishing Ir Communications

    Appendix F. Establishing IR Communications Appendix F. Establishing IR Communications As discussed in Chapter 2, the PT878 includes an infrared transceiver for communication with IR products that comply with the IrDA protocol. However, you must also be sure that the operating system of your personal...
  • Page 274 In some instances, the infrared port must be enabled in the BIOS of your PC. Consult your computer documentation, manufacturer or MIS department. Assistance is also available from the Microsoft Support Knowledge Base at http://support.microsoft.com. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 275: Appendix G. Glossary

    It can be used to offset the flow velocity reading, and is normally set to zero. Detection Threshold — Percent of peak the PT878 thickness gauge uses to make measurements Energy Option — Option that enables flow measurement in a heating or cooling system.
  • Page 276 Receive Window — A window of time during which the PT878 tries to detect the ultrasonic signal. It is determined by using the fluid soundspeed and the signal path length to estimate when the signal will arrive at the receiving transducer.
  • Page 277 Tracking Windows — A feature which allows the receive window to move automatically if the ultrasonic signal is lost. The PT878 will set up the window in various positions based on a minimum and maximum soundspeed range.
  • Page 278 Wedge Angle — Angle of the transducer’s ultrasonic transmission in the transducer wedge. Zero Cutoff — Parameter that causes velocity measurements less than the absolute value of the cutoff (either positive or negative values) to be reported as zero. Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 279: Analog Outputs

    Checks, Power Up ..........12 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 280 Drive Manager ........... 102 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 281 Frequency ............59 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 282 Locale Option........... . 117 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 283 Model Number ........... 110 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 284 Menu Map........... 222 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 285 Simulate Option ..........192 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...

  • Page 286: Specifications

    System Description ..........2 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 287 Specifications ..........217 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 288 View Option ............92 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 289 Zero Cutoff ............179 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 290 Index [no content intended for this page - proceed to next page] Transport® Model PT878 Portable Liquid Flowmeter User’s Manual...
  • Page 291 GE Sensing. Fuses and batteries are specifically excluded from any liability. This warranty is effective from the date of delivery to the original purchaser. If GE Sensing determines that the equipment was defective, the warranty period is: •...
  • Page 292 If GE Sensing instructs you to send your instrument to a service center, it must be shipped prepaid to the authorized repair station indicated in the shipping instructions.
  • Page 293 Sensing CONFORMITY Panametrics Limited Shannon Industrial Estate Shannon, County Clare Ireland declare under our sole responsibility that the ™ TransPort PT878 Portable Ultrasonic Flowmeter ™ TransPort PT878GC Clamp-On Portable Ultrasonic Flowmeter ™ TransPort 2PT868 2-Channel Portable Ultrasonic Flowmeter ™ TransPort PT868 Portable Ultrasonic Flowmeter ™...
  • Page 294 CONFORMITE Nous, Panametrics Limited Shannon Industrial Estate Shannon, County Clare Ireland déclarons sous notre propre responsabilité que les ™ TransPort PT878 Portable Ultrasonic Flowmeter ™ TransPort PT878GC Clamp-On Portable Ultrasonic Flowmeter ™ TransPort 2PT868 2-Channel Portable Ultrasonic Flowmeter ™ TransPort PT868 Portable Ultrasonic Flowmeter ™...
  • Page 295 ERKLÄRUNG Wir, Panametrics Limited Shannon Industrial Estate Shannon, County Clare Ireland erklären, in alleiniger Verantwortung, daß die Produkte ™ TransPort PT878 Portable Ultrasonic Flowmeter ™ TransPort PT878GC Clamp-On Portable Ultrasonic Flowmeter ™ TransPort 2PT868 2-Channel Portable Ultrasonic Flowmeter ™ TransPort PT868 Portable Ultrasonic Flowmeter ™...
  • Page 297 Customer Support Centers U.S.A. The Boston Center 1100 Technology Park Drive Billerica, MA 01821 U.S.A. Tel: 800 833 9438 (toll-free) 978 437 1000 E-mail: sensing@ge.com Ireland Sensing House Shannon Free Zone East Shannon, County Clare Ireland Tel: +35 361 470291 E-mail: gesensingsnnservices@ge.com www.gesensinginspection.com...

Table of Contents