Table of Contents
Advertisement
Setting up a New Log (cont.)
3. The next prompt asks for the starting date and time.
a. Press
[ENTER]
the first number. Use the [ ] and [ ] keys to scroll to any
number you wish to change, or the [ ] key to scroll to the
time box.
b. Two alternatives are available to change a highlighted
number:
•
Use the numeric keys to enter the desired number.
•
Use the [
increments, to the desired number. (For example, if the text
box displays 09, pressing the [
number to 07.) You can scroll from 01 to 12 for the month
and from 01 to 31 for the day (depending on the number
you have selected for the month).
c. In either case, press
4. Follow the same procedure to enter the end date and time.
5. The final prompt in this window asks for the logging interval.
a. Press
[ENTER]
b. Use the numeric keys to enter the desired interval in
seconds.
c. Press
[ENTER]
6. You have completed entering parameters in this window. To
select the measurements,
a. Press the [
b. Then press the [
c. Finally, press the [ ] key to move to the Measurements
tab, and press
similar to Figure 8-6 on the next page.
Logging Data
to enter the text box. The meter highlights
] or [
] arrow keys to scroll, in 1-digit
[ENTER]
to open the text box.
to confirm the entry.
] key to return to the Format prompt.
] key to return to the General tab.
[ENTER]
. The Measurements window appears
] key twice changes the
to confirm the entry.
April 2009
8-7
Advertisement
Table of Contents
