Table of Contents
Advertisement
April 2009
Entering the Logging Menu
To enter the Logging Menu, press the
right of the PT878GC keypad. The Main Menu replaces the
Status Bar at the top of the screen. Press the [ ] arrow key three
times to scroll from the Site Menu to the Logging Menu. At the
Logging Menu, press
Figure 8-1 below. Refer to Figure A-9 on page A-9 of Appendix
A, Menu Maps.
Site Program Meter
Velocity, ft/s
Units
Delta-T, ns
E0: No Errors
To scroll to a particular option, press the [
until you reach the option. Then press
window.
When entering parameters in an option, press:
•
The [ ] key to step through the available parameters
•
The [ ] key to scroll back to a previously entered parameter
•
[F2]
The
key (Cancel) or the
time and return to Operate Mode without changing the
parameters.
8-2
[ENTER]
. The screen appears similar to
Manager
New Log
Test
0.00
0.10
Figure 8-1: The Logging Menu
[ESC]
[MENU]
key at the lower
Logging
Service
Signal, dB
32
Volume, l/s
] or [
[ENTER]
to open the option
key to exit an option at any
0.0
] arrow keys
Logging Data
Advertisement
Table of Contents
