Table of Contents
Advertisement
April 2009
Entering Pipe Parameters (cont.)
1. The first prompt asks you to select the pipe material.
a. Press
[ENTER]
b. A drop-down list of materials opens. Table 4-1 below lists
the available preprogrammed materials on the list. Press
the [
] or [
or scroll to "Other" for a material not on the list. You can
press the [ ] key to scroll down by a page, or the [ ] key
to scroll up by a page.
Table 4-1: Preprogrammed Pipe Materials
Pipe Material
Category
Al - Aluminum
Brass
Cu - Copper
CuNi - Copper/Nickel
Glass
Gold
Inconel
Iron
Monel
Nickel
Plastic
Steel
Tin
Titanium
Tungsten
Zinc
Other
c. Press
[ENTER]
4-8
to enter the material prompt.
] keys to scroll to the appropriate material,
Rolled
None
Annealed or Rolled
70% Cu 30% Ni or
90% Cu 10% Ni
Pyrex, Flint, or Crown
Hard-drawn
None
Armco, Ductile, Cast, Electrolytic
None
None
Nylon, Polyethylene, Polypropy-
lene, PVC (CPVC), or Acrylic
Carbon Steel or Stainless Steel
Rolled
None
Annealed, Carbide, Drawn
Rolled
Any material
to confirm the choice.
Specific Material
Programming Site Data
Advertisement
Table of Contents
