Entering Fluid Types and Speeds
To access the Fluid option, scroll to the Fluid entry on the
Program Menu and press
Transducer/Pipe form, press the [ ] arrow key to reach the Fluid
window, and press
4-5 below. To step through each parameter, press the [ ] key.
Refer to Figure A-3 on page A-3 of Appendix A, Menu Maps.
Transducer
Figure 4-5: The Fluid Type Window
1. The first prompt asks for the gas type.
a. Press
[ENTER]
choices are available:
•
Other
•
Air
•
Natural Gas
•
Steam
Programming Site Data
[ENTER]
. (If you are already in the
[ENTER]
.) The screen appears similar to Figure
Transducer/Pipe
Fluid
Pipe
Lining
Fluid Type
Sound Speed
Cancel
to open the drop-down menu. The following
Path
Fluid
Other
345.75
m/s
OK
April 2009
4-13