Table of Contents
Advertisement
Programming the Thickness Gauge (cont.)
6. The final value, the detection threshold, represents the percent
of peak the PT878GC uses to make measurements. It will
consider anything above the entered percentage as part of the
signal. To change this value:
a. Press
[ENTER]
b. Use the numeric keys to enter the recommended value.
c. Press
[ENTER]
You have finished entering values for the Programming window.
To leave this window:
•
Press the [ ] arrow key to move to the Materials tab.
•
[F2]
Press
(Cancel) to return to Operate Mode without
confirming the changes. The PT878GC returns to Operate
Mode.
•
[F3]
Press
(OK) to confirm the new data and return to Operate
Mode. The PT878GC returns to Operate Mode.
Servicing the PT878GC
to open the text box.
to confirm your entry.
April 2009
9-19
Advertisement
Table of Contents
