Customizing The Display Screen - GE TransPort PT878GC User Manual

Customizing the Display Screen

You might wish to display one or two parameters, or customize
the soft keys to quickly access particular menus. The Site Menu
enables you to make more comprehensive changes in your
display screen.
To enter the Site Menu, press the
the PT878GC keypad. The Menu Bar replaces the Status Bar at
the top of the screen. The Site Menu will be highlighted in the
upper left corner. Press
now appears similar to Figure 6-6 below. While following the
programming instructions, refer to Figure A-2 on page A-2 of
Appendix A, Menu Maps.
Site Program
Manager
Velocity, ft/s
Save Now
1 View
2 Views
3 Views
4 Views
Delta-T, ns
Drive Manager
FKeys
About
E0: No Errors
•
To specify the number of parameters displayed, go to page
6-10.
•
To customize or clear softkeys (FKeys), go to page 6-11.
Displaying and Configuring Data
[MENU]
[ENTER]
or the [
Meter Logging Service
0.00
4
0.10
Figure 6-6: The Site Menu
April 2009
key at the lower right of
] arrow key. The screen
Signal, dB
32
Volume, l/s
0.0
6-9