Ntp Server Cooperation; Time Control For System Unit - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Setting time information
Displaying/setting time information

NTP server cooperation

When external Network Time Protocol (NTP) server is installed, the clock time
of management module can be synchronized with the clock time of NTP
server. NTP servers can be installed up to four. When one of the NTP servers
is failed, the management module and NTP servers are continued
synchronizing clock time. The synchronizing clock time are performed after
starting operation, and then every 30 minutes. You can synchronize the clock
time forcibly using the management module console. NTP server cooperation
function is disabled for the factory default setting.
Displaying/setting NTP server information

Time control for system unit

The management module can be operated as NTP server, so the management
module can synchronize the clock time of modules in the system unit.
The following modules are possible to synchronize the clock time.
• BMC
• LPAR manager
Hitachi Compute Blade 500 Series Management Module Setup Guide
Item
Table 2-16 LCD touch console operation
Item
Figure 2-1 NTP server cooperation
Table 2-17 Web console operation
Item
Functional detail
Command
set time local
set time timezone
Operation
System settings > Time
Operation
Administration tab > Date and time
2-9