Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 276

Successful
Failed
Tip: When Import failed. is shown, see
page
9 When import succeeded is shown, touch OK.
.
10 System settings menu appears.
.
11 Touch USB device unmount button on System setting menu to unmount
.
the USB flash drive.
12 When the following dialog box appears, touch OK.
.
13 Check that no USB device unmount button is on System setting menu.
.
2-252
Hitachi Compute Blade 500 Series Management Module Setup Guide
2-260.
Functional detail
Troubleshoot in import failure on