Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 61

TLS/SSL version
TLS1.0
TLS1.1
TLS1.2
Note:
1 CB 520X B1/B2 and CB 520H B3 do not provide setting items for SSL 3.0 because
.
they do not support SSL 3.0.
Item
Displaying TLS/SSL version
settings for management
modules
Editing TLS/SSL version settings
for management modules
Displaying TLS/SSL version
settings for BMC
Editing TLS/SSL version settings
for BMC
Displaying TLS/SSL version settings for management
modules
Editing TLS/SSL version settings for management
modules
Note:
• You cannot disable all TLS/SSL versions.
• When Security strength is set to high for a management module, only TLS
1.2 is enabled among TLS versions: SSL 3.0 and TLS 1.0/1.1 are
disabled. This setting cannot be changed.
• When Security strength is set to high or when Security strength is set to
default and communication is enabled only with TLS 1.2, connection with
HCSM not supporting TLS 1.2 is not available. See HCSM instruction
manuals for the operation.
• TLS/SSL versions for BMC can be set only on Web console.
• When Security strength is set to high, only TLS 1.2 is enabled for server
blade Web console and remote console, SSL 3.0 and TLS 1.0/1.1 are
disabled. This setting cannot be changed. For SMASH (WS-Management),
TLS 1.0 is used.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Enabled
Enabled
Enabled
Table 2-37 Web console operation
Resources tab > Systems > Security strength
setting > TLS/SSL version tab
Resources tab > Systems > Security strength
setting > TLS/SSL version tab > Edit
Resources tab > Modules > All Modules > Server
Blades > Server Blade x > BMC tab
Resources tab > Modules > All Modules > Server
Blades > Server Blade x > BMC tab > Edit
Table 2-38 CLI console operation
Item
Functional detail
Factory default setting
Operation
Operation
show security setting
set security tls mgmt-module
2-37