Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 127

For details about setting items, see the Hitachi Compute Blade 500 Series
Web Console User's Guide or Hitachi Compute Blade 500 Series CLI
Console User's Guide.
Port Number
¢
Bind DN/Bind Password
¢
You must set the method according to the settings you specified
during user registration for LDAP connection. See
Setting on page 2-91
• Searching LDAP directory setting
Set the necessary information for the LDAP directory searching. For
details about setting items, see the Hitachi Compute Blade 500 Series
Web Console User's Guide or Hitachi Compute Blade 500 Series CLI
Console User's Guide.
Base DN
¢
Attribute Indicating Login IDs
¢
Attribute Indicating Roles
¢
If you grant a role to the user account for logging in to a management
module and BMC during the operation described in "Granting Role
Information", specify the attribute used for granting the role.
Number of inquiry times
¢
For the number of the inquiry times item, set the number of times in
which LDAP servers are traced based on the referral information and
inquired (such as searched) if an LDAP server refers to other LDAP
servers in order to achieve the method that divides and manages the
LDAP directory by using multiple LDAP servers. If you set this setting
to 0, each module does not trace the referred LDAP server even if an
LDAP server refers to another LDAP server.
• Group authentication setting
Set the following information for group authentication. If you do not
specify group settings during the operation described in "Registering
Groups" you do not need to perform this operation. For details about
setting items, see the Hitachi Compute Blade 500 Series Web Console
User's Guide or Hitachi Compute Blade 500 Series CLI Console User's
Guide.
Group authentication method
¢
If group authentication is not used, an account registered in each
module or in the LDAP directory is used for user authentication
according to the authentication method setting used when LDAP
linkage is enabled if the module is set to link with an LDAP server.
If you use group authentication, you can select either of the following
two group authentication methods:
- Static group authentication method
- Dynamic group authentication method
The former authentication method performs authentication by
checking whether the user account to be authenticated belongs to the
DN of the group that is allowed to log in that is described later. The
Hitachi Compute Blade 500 Series Management Module Setup Guide
for details.
Functional detail
Active Directory
2-103