Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 292

Operation result
Success
Failure
Occurrence
The following table shows the audit log format. The format is the same for
management modules and for server blades.
Common identifier
(CommonSpecID)
Common specifications
revision number
(Rev)
Sequence number
(seq_no)
Message ID
(msgid)
Date & time
(date)
Detection entity
(EntityInfo)
Detection location
(Location)
Operation category
(Category)
2-268
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-147 Operation result
indicates Success of operation
indicates Failure of operation
indicates Occurrence operation
(The result is not categorized to Success or Failure.)
Table 2-148 Format of the audit log
Item
Fixed to CELFSS
2
ID number to identify the log order.
Assigned 1 to 9999999999.
Return to one when exceed
9999999999.
The message ID (hexadecimal).
Date, time, and time zone when
recorded the operation.
YYYY-MM-DDThh;mm:ss.SSS+h2:s2
YYYY: year, MM: Month, DD: Date,
T: fixed (delimiter), hh: hour, mm:
minute, ss: second
SSS: mili-second (fixed to 000),
h2: Time zone offset hour, s2: Time
zone offset minute
The operated equipment name.
Management module operation log:
Management module
The operated host name.
Management module operation log: IP
address for management module
The category name categorized by
operation type.
Functional detail
Descriptions
Descriptions Remarks
This corresponds to
the seq_no item of
the operation log.
This corresponds to
the msgid item of the
operation log.
This corresponds to
the date item of the
operation log.
This corresponds to
the place item of the
operation log.
Corresponds to categ
in the operation log.