Viewing The Host Information Of The Server Blade - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Displaying the MAC address change log

Viewing the host information of the server blade

The server installation and monitoring tool is a tool kit supplied with the
server, which enables automatic installation of the OS and drivers on the
server as well as automatic upgrading of the utilities, drivers, and firmware.
By installing the server installation and monitoring tool in the OS of the
server blade, you can view the OS information (host information) from the
Web console of the management module.
Information
1
OS
Host name
Y: Available
Notes:
1 The switch module console can be logged in without inputting the switch module
.
account.
2 Connect the OS console during LPAR manager is booting, you can connect the LPAR
.
manager console. For details of LPAR manager console, see the Hitachi Compute
Blade 500 Series Logical partitioning manager user's guide.
Note:
• To view the host information, ServerNavigator must be installed on the
OS.
• Viewing the host information is only supported for Windows, Linux, and
VMware.
• Viewing the host information of a guest OS in a virtual environment
(Hyper-V, LPAR manager, VMware, etc.) is not supported.
• Viewing the host information is supported for the following versions:
Management module
Server blade
Hitachi Compute Blade 500 Series Management Module Setup Guide
Item
Table 2-74 Host information that can be viewed
Description
Type of the
OS installed
on the server
Host name
2
specified for
the OS
installed on
the server
A0150 or later
Functional detail
Windows
Windows version and
service pack version
Example: Microsoft
Windows Server 2008 R2
Enterprise Service Pack 1
Computer name
Command
show log mac-edit
Linux
The output of /etc/redhat-
release is displayed.
Example: Red Hat Enterprise
Linux Server release 6.5
(Santiago)
The output of the hostname
command is displayed.
2-63