Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 307

Message type
0x17A1 LAN port <Management LAN port 1> redundancy was
restored.
0x17A1 LAN port <Management LAN port > redundancy was
restored.
The other Information may be reported, but do not affect the system
operation.
• The following alerts may be reported to HCSM during update. Those alerts
are just for checking in procedure and not affect the system operation.
Message type
Alert
Information
The other Information may be reported, but do not affect the system
operation.
• The following alert messages may be reported because of the temporal
disconnect of the network during the update, when you are operating
LPAR manager.
The alert messages do not affect the system operation.
"SVP Access Failure" on LPAR manager window.
Alert to SeverConductor/Blade Server Manager:
[Alert] 0x162F On physical partition <x>, a communication error occurred between
LPAR manager and the management module.
Alert to HCSM
[Alert] FD43h On the physical partition, an alert event occurred.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Message
Table 2-155 Alert message
Redundancy for FD78h module is lost.
(Error part: Management LAN Port0)
Redundancy for FD78h module is lost.
(Error part: Management LAN Port1)
Redundancy for FD78h module is lost.
(Error part: Management LAN Port)
Redundancy for the module is recovered.
(Error part: Management LAN Port0)
Redundancy for the module is recovered.
(Error part: Management LAN Port1)
Redundancy for the module is recovered.
(Error part: Management LAN Port)
Table 2-156 Alert message
Message
Functional detail
Message
2-283