Banner Feature; Login Banner Feature - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Displaying/Setting Syslog transfer
for management modules
Displaying/Setting Syslog transfer
for BMC
Note:
• Only one syslog server can be specified as destination.
• Syslog transfer does not support SSL3.0.
(3) Sending Syslog transfer test message
When you log into the management module CLI console or Web console,
"Logged in to the System Console" or "Logged in to the System Web Console"
is sent. For BMC, "Logged in to the remote console" is sent when you log into
BMC. Check if the message is sent or not. When the message is sent, Syslog
transfer setting is correct.

Banner feature

Login banner feature

This section describes the login banner feature of the CB 500 management
module.
Overview of the login banner feature
The login banner feature displays a login banner (warning) when the
management module is connected. Whether the login banner is displayed
depends on the access method, as follows.
#
1
2
3
Display example for the CLI console:
Preset banner text is displayed before the login prompt (login:) as shown.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-135 Web console operation
Item
Table 2-136 Whether the login banner is displayed
Access method
CLI console
Web console
LCD touch panel
Functional detail
Operation
Administration tab > Syslog transfer
Resources tab > Modules > All Modules >
Server Blades > Server Blade x > BMC tab
Displayed
Displayed
Not displayed
Banner display
2-247