Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 300

ID
388E
3890
3891
3892
3898
3899
389A
389B
389D
3900
3901
3902
3903
2-276
Hitachi Compute Blade 500 Series Management Module Setup Guide
Operation
Recording trigger
category
Changing JP1/SC/BSM
connection settings.
Creating E-mail setting. E-mail setting is created.
Changing E-mail
setting.
Removing E-mail
setting.
Changing switch
module settings.
Changing switch
module settings.
Changing password
settings for LCD touch
panel.
Initializing password
settings for LCD touch
panel.
Clearing server blade
host information
Changing HCSM
settings with HCSM
command
Adding HCSM server
settings with HCSM
command
Changing HCSM server
settings with HCSM
command
Changing HCSM server
settings with HCSM
command
Functional detail
Message
JP1/SC/BSM connection setting is
changed. Channel:xxx Server:xxx
Channel:xxx
E-mail setting is changed.
Channel:xxx
E-mail setting is removed.
Channel:xxx
On Switch module N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
On Switch module N, setting is
changed. Channel:xxx Port#:xxx
Category:xxx Detail:xxx Value:xxx
LCD touch console password is
changed. Channel:xxx
LCD touch console password is
initialized. Channel:xxx
Host information on the server
blade n has been cleared.
Channel:xxx
HCSM setting is changed.
Means: %2$s; Type: %3$s;
Changes: %4$s; After changed:
%5$s
HCSM management server setting is
added.
Means: %2$s; IP address: %3$s;
Alert port number: %4$s; Alert
level: %5$s; Retry interval: %6$s;
Retry duration: %7$s
HCSM management server setting is
changed.
Means: %2$s; IP address: %3$s;
Type: %4$s; Before changed:
%5$s; After changed: %6$s
HCSM management server setting is
changed.
Means: %2$s; IP address: %3$s;
Changes: %4$s; After changed:
%5$s