Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 310

Tip: When updating the management module firmware, execute step 3.
3 Check Hot standby status both management modules 0 and 1.
.
Tip: Use the result of step 3 to check status after updating.
4 Click Management Modules > management module x with Active for
.
Hot standby status from the tree on the left.
5 Condition tab shows the current Management module firmware version,
.
Dictionary version, and Equipment parameter version. Check that the
latest versions, which are obtained in (1) Obtaining the latest versions of
Management module firmware/Dictionary/Equipment parameter, are later
than the current versions.
2-286
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail