Setting Lpar Boot Order - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Setting LPAR boot order

[Management module firmware version A0125 or later]
Perform the following procedure for setting boot order to set up a guest OS
on LPAR.
When LPAR status is DEACT, you can set and change the boot order.
The following table shows the combinations of server blades and LPAR
manager firmware versions for which this operation can be performed.
CB 520H A1/B1
CB 520H B2
CB 520H B3
CB 520A A1
CB 540A A1/B1
CB 520X B1
CB 520X B2
Boot order cannot be set on Management module firmware version A0120 or
earlier. For details, see the Hitachi Compute Blade 500 Series Logical
partitioning manager User's Guide.
Boot order settings
1 Click Resources.
.
2-146
Hitachi Compute Blade 500 Series Management Module Setup Guide
Server blade
01-0X or later
01-6X or later
02-05 or later
01-1X or later
01-2X or later
02-02 or later
02-1X or later
Functional detail
LPAR manager firmware version