Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 285

A syntax error occurred.
The import file has incorrect command syntax.
1 Check the content of the import result file, importresult-
.
yyyymmddhhmmss.txt, stored in the USB flash drive that contains the
import file.
An example is shown below:
(1) shows that an error is the 20th letter in the fourth line of the import
file. Since (2) shows the fourth line, correct the 20th letter in the line.
2 Correct the file referring to the import result file, recreate it, and execute
.
the import again.
Importation was failed.
The failure is caused by the inexecutable command included in the import
file.
1. Check the content of the import result file, importresult-
yyyymmddhhmmss.txt, stored in the USB flash drive with the import file.
An example is shown below:
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail
2-261