Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 119

7 Right-click ADSI Edit again, and select Connect to....
.
8 Select Configuration as Context, and click the OK button.
.
9 Place and right-click the mouse on \ADSI Edit\configuration
.
\CN=Configuration\DC=domain base\CN-Services\CN=Windows
NT\CN=Directory Service, and select properties.
10 Click dSHeuristics, then the Edit button to set a value in the Properties
.
screen. When the value is <Not Set>, type 0000002 in the field. When a
value is set, change the 7th figure from the left to 2. Do not change other
figures.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail
2-95