Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 84

• Current using WWN
• WWN for LPAR manager
• Default Physical MAC address
• Optional Physical MAC address
• Current using MAC address
• MAC address for LPAR manager
You can confirm the value of WWN and MAC address through the
management module without turning on the server blade, confirming the OS
window, and confirming the UEFI window. The management module can show
in the values list of all Fibre Channel mezzanine cards and the LAN expansion
cards in the server blade. Therefore, you can confirm the used WWN and MAC
address immediately*.
*The changed WWN and MAC address by the management module are set on
the Fibre Channel mezzanine card and LAN expansion card when turning on
the server blade. If the server blade is not turned on after changing the WWN
and MAC address, the values of current WWN and current MAC address,
which are displayed in the management module console, may be different
from the actual values assigned to the Fibre Channel mezzanine card and the
LAN expansion card.
Displaying Default
Physical WWN
Displaying Optional
Physical WWN
Displaying WWN in
current use
Displaying Default
Physical MAC address
Displaying Optional
Physical MAC address
Displaying MAC address
in current use
Displaying WWN for
LPAR manager
Displaying MAC address
for LPAR manager
Note: When Default Physical WWN display function of Emulex 8Gb 2-port
Fibre Channel mezzanine card is not supported, the Default Physical WWN
value is not displayed. Confirm the Default Physical WWN value in the BIOS
setting window.
2-60
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-70 Web console operation
Item
Resources tab > Systems > WWN Management > Server
blade x > Show details button > Default Physical WWN
Resources tab > Systems > WWN Management > Server
blade x > Show details button > Optional Physical WWN
Resources tab > Systems > WWN Management > Show
Current WWN button
Resources tab > Systems > MAC Management > Server
blade x > Show details button > Default Physical MAC
Resources tab > Systems > MAC Management > Server
blade x > Show details button > Optional Physical MAC
Resources tab > Systems > WWN Management > Server
blade x > Show Current MAC button
Resources tab > Systems > WWN Management > Server
blade x > Show details button > Virtual WWN
Resources tab > Systems > MAC Management > Server
blade x > Show details button > Virtual MAC
Functional detail
Operation