Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 226

Tip: Executed and Unexecuted are shown for Backup LP Settings only
when you have selected a bank with "Assigned (firmware to be
overwritten)" for installation. You can select a bank with "Assigned
(enable to overwrite firmware)" for State in step 4 and go through step 7
through step 9 only with management module firmware version A0145 or
later.
10 Click OK.
.
11 Click Close.
.
2-202
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail