Firmware; Updating Firmware From The Management Module - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

ID
1008
1009
100A

Firmware

This section describes updating firmware for management modules and
server blades.

Updating firmware from the management module

Firmware is software embedded in a device to provide basic control over
hardware. Multiple pieces of firmware are embedded in the system unit. You
can update the following firmware using the management module.
Management module firmware Runs on a management module.
Dictionary
Device parameter
Server blade firmware
LPAR manager firmware
Note:
1 This is not firmware in a strict sense, but is updated from a management module
.
like firmware. That is why it is included in this table.
2-280
Hitachi Compute Blade 500 Series Management Module Setup Guide
Operation
Recording trigger
category
Login to server blade
Web console
Logout from server
blade Web console
Failing login to server
blade Web console
Table 2-150 Firmware type
Name
Is a data file installed on a management module;
converts log messages.
Is a data file installed on a management module;
includes parameters for modules installed in the system
unit.
Runs on a server blade; includes BMC and UEFI.
Runs LPAR manager on a server blade.
For details about how to update the LPAR manager
firmware, see
2-196.
Functional detail
Logged in to the server blade web
console. Username:xxx Source IP
address:xxx User authentication
method:xxx
Logged out from the server blade
web console. Username:xxx Source
IP address:xxx Cause:xxx
Failed to login to the server blade
web console. Username:xxx Source
IP address:xxx Cause:xxx
Description
1
1
Updating LPAR manager firmware on page
Message