Supported Ldap Server; Active Directory Setting - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Even if the modules are linked with an LDAP server, the former authentication
method enables users to use their account registered in each module to log
into the module. If the LDAP directory contains the account information that
has the same name as each module, the former authentication method first
uses the information registered in each module for authentication. If
authentication that uses accounts registered in each module fails, accounts in
the LDAP directory are used for authentication.
A maximum of three LDAP servers can be registered. If you register multiple
LDAP servers, the system tries to connect to the LDAP servers in the order
they were registered. The system searches the LDAP directory on the server
of which connection was established first, and tries to authenticate users. If
the system fails to connect to all the registered LDAP servers, user
authentication using the LDAP servers fails.
Tip:
• For server blades, BMC tries to authenticate a user using the local account
first. If the authentication fails, it tries to authenticate the user using the
LDAP server.

Supported LDAP server

The system unit supports Active Directory, included with the following
Windows Server, as the LDAP server with linkage.
•
Microsoft
•
Microsoft
•
Microsoft
•
Microsoft
•
Microsoft
•
Microsoft

Active Directory Setting

(Windows side setting)
This section describes settings required when Active Directory is used as an
LDAP server.
The following table shows required setting items.
Server certification
Bind DN for the LDAP server
User account for logging in to management modules and to server blades
Hitachi Compute Blade 500 Series Management Module Setup Guide
® ®
Windows Server
® ®
Windows Server
® ®
Windows Server
® ®
Windows Server
® ®
Windows Server
® ®
Windows Server
Table 2-92 Active Directory setting items
Functional detail
2008 R2, Standard
2008 R2, Enterprise
2008, Standard
2008, Enterprise
2012, Standard
2012, Datacenter
Item
2-91