Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 181

Tip: For details of the remote console and the virtual media console, see
the Hitachi Compute Blade 500 Series Remote Console User's Guide.
8 Confirm the following message is displayed in the boot order window,
.
click OK.
9 The virtual drive as boot device is added in the USB device.
.
HBA boot driver settings
When the necessary device is not displayed in HBA tab, confirm the HBA boot
driver settings as following procedure and perform the necessary settings.
1 Select HBA tab in Boot order settings window.
.
2 Select HBA port, and click HBA boot settings.
.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail
2-157