Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 174

8 Select the added device in USB tab, click Add to boot order.
.
When the necessary device is not displayed, to be recognized the
necessary device as follow the procedure of
page
Tip: [Management module firmware version A0205 or later]
When multiple USB ports are assigned to an LPAR, a single port is
displayed.
9 Select the added device in HBA tab, click Add to boot order.
.
When the necessary device is not displayed, to be recognized the
necessary device as follow the procedure of HBA boot driver settings.
2-150
Hitachi Compute Blade 500 Series Management Module Setup Guide
2-153.
Functional detail
Connecting to virtual drive on