Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 275

Requirements
• LCD touch console
• USB flash drive (version: USB 2.0)
Tip: Files cannot be imported if the LCD touch console function is disabled or
if USB ports are disabled.
Importing procedure
1 Create an import file referring to
.
page 2-256, and store it into a USB flash drive.
Note: Create a folder name and file name for an import file in
alphanumerics. The file path consisting of both names must be up to 255
alphanumerics.
2 Connect the LCD touch console and a USB flash drive with the import file
.
to USB ports on the front panel of the server chassis. When the USB flash
drive is recognized, USB device unmount button appears on LCD touch
console home.
Tip: If USB device unmount button does not appear, touch Refresh.
3 Touch System settings on LCD touch console home to start import.
.
4 Touch Import on System settings menu.
.
5 Touch a setting file for import on Import (Select file) window. Then touch
.
Open/OK with the setting file selected.
Tip:
• Touching a file turns the background to blue.
• The current directory is shown flush right between Import (Select file)
and file names.
6 When the following dialog box appears, touch OK.
.
7 Importing (Execution) message appears. Wait until the view is
.
changed.
8 Check the result on Import (Result).
.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Import file format and modification on
Functional detail
2-251