Tls/Ssl Version Settings - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

SNMP v3
Encryption algorithm
None
DES
AES128
Authentication algorithm
None
MD5
SHA1

TLS/SSL version settings

TLS/SSL versions, which are used for encryption communication at
management interfaces for management modules and BMC, can be
independently enabled or disabled. The following shows the SSL/TLS version
settings at shipping time.
Management Module
SSL3.0
TLS1.0
TLS1.1
TLS1.2
Note:
1 The SSL 3.0 protocol has a communication vulnerability and part of the
.
communications might be readable by third parties.
Therefore, we recommend that you disable SSL 3.0 if it is not required for use.
BMC
SSL3.0
2-36
Hitachi Compute Blade 500 Series Management Module Setup Guide
Management module
TLS/SSL version
TLS/SSL version
Functional detail
Security strength
Default high
Y -
Y -
Y Y
Management module
Security strength
Default high
Y -
Y -
Y Y
Factory default setting
1
Disabled
Enabled
Enabled
Enabled
Factory default setting
1
Enabled
Server blade
Security strength
Default high
Not supported
Server blade
Security strength
Default high
SNMP: Not supported