Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 169

1 Click Resources tab on the Web console.
.
2 Click a server blade number from the Modules tree.
.
3 Click LPAR tab from Server Blade n Information pane.
.
4 Click an LPAR to assign the USB device, and click Edit USB Assign from
.
Action menu.
5 Set USB port dialog box appears.
.
Click check boxes in Assign column to assign the port, and then click
Confirm. When multiple ports exist, the port used for calling the remote
console is displayed as USB/KVM.
6 The confirmation dialog box appears. Check the setting and click OK.
.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail
2-145