Identifying Snmp Trap Messages; Environmental Events - Oracle X6-2 Service Manual

Identifying SNMP Trap Messages

It is possible to configure Oracle ILOM to generate Simple Network Management Protocol
(SNMP) traps when hardware problems occur. For information about how to configure SNMP
alert rule destinations to start receiving these traps, refer to the Oracle Integrated Lights Out
Manager (ILOM) 3.2 Documentation Library at:
http://www.oracle.com/goto/ilom/docs
The tables in these sections list the set of SNMP traps that are generated from Oracle ILOM.
"Environmental Events" on page 263
■
"Hard Disk Drive Events" on page 265
■
"Power Events" on page 266
■
"Fan Events" on page 270
■
"Memory Events" on page 271
■
"Entity Presence Events" on page 276
■
"Physical Presence Events" on page 277
■

Environmental Events

The following table lists environmental events.
Messages and Descriptions
SNMP Trap: sunHwTrapTempFatalThresholdExceeded
Oracle ILOM Event Message: Lower fatal threshold exceeded
Severity and Description: Critical; A temperature sensor has reported that its value has gone
above an upper fatal threshold setting or below a lower fatal threshold setting.
The sunHwTrapThresholdType object indicates whether the threshold was an upper or lower
threshold.
SNMP Trap: sunHwTrapTempFatalThresholdDeasserted
Oracle ILOM Event Message: Lower fatal threshold no longer exceeded
Severity and Description: Informational; A temperature sensor has reported that its value has
gone below an upper fatal threshold setting or above a lower fatal threshold setting.
The sunHwTrapThresholdType object indicates whether the threshold was an upper or lower
threshold.
Component Name
/SYS/PS[0-1]/T_OUT
/SYS/MB/T_IN_ZONE0
/SYS/MB/T_OUT_ZONE0
/SYS/MB/T_IN_ZONE1
/SYS/MB/T_OUT_ZONE1
/SYS/MB/T_IN_ZONE2
/SYS/MB/T_OUT_ZONE2
/SYS/PS[0-1]/T_OUT
/SYS/MB/T_IN_ZONE0
/SYS/MB/T_OUT_ZONE0
/SYS/MB/T_IN_ZONE1
/SYS/MB/T_OUT_ZONE1
Monitoring Components and Identifying SNMP Messages
Identifying SNMP Trap Messages
263