Remove The Oracle Pcie Nvme Switch Card From Pcie Slot 1 - Oracle X6-2 Service Manual

Remove the Oracle PCIe NVMe Switch Card From PCIe Slot 1

Remove the Oracle PCIe NVMe Switch Card From
PCIe Slot 1
1. Prepare the server for service.
a. Power off the server and disconnect the power cords from the power
supplies.
See
Extend the server to the maintenance position.
b.
See
Attach an antistatic wrist strap to your wrist, and then to a metal area on the
c.
chassis.
See
d. Open the server fan door to gain access to the disk backplanes.
See
Remove fan module FM0 (the left most fan viewing the server from the
e.
front).
See
2. Remove the PCIe riser from slot 1.
For instructions, see
138 Oracle Server X6-2 Service Manual • June 2016
"Powering Down the Server" on page
"Extend the Server to the Maintenance Position" on page
"Take Antistatic Measures" on page
"Open the Server Fan Door" on page 59
"Remove a Fan Module" on page
"Remove a PCIe Riser From PCIe Slot 1 or 2" on page
51.
56.
59.
76.
99.