Identifying Snmp Trap Messages - Oracle X7-2L Service Manual

Identifying SNMP Trap Messages

Component Name (Oracle ILOM CLI
Targets)
/SYS/DBP/HDD[0-x]/OK2RM
/SYS/DBP/HDD[0-x]/NVME
/SYS/DBP/HDD[0-x]/NVME/PRSNT
Related Information
"System Chassis Components" on page 283
■
"Cooling Unit Components" on page 285
■
"Disk Backplane Components" on page 285
■
"Memory Device Components" on page 287
■
"Power Unit Components" on page 287
■
"Processor Components" on page 288
■
"System Motherboard Components" on page 289
■
"System Firmware Components" on page 291
■
Identifying SNMP Trap Messages
It is possible to configure Oracle ILOM to generate Simple Network Management Protocol
(SNMP) traps when hardware problems occur. For information about how to configure SNMP
alert rule destinations to start receiving these traps, refer to the Oracle Integrated Lights Out
Manager (ILOM) 4.0 Documentation Library at http://www.oracle.com/goto/ilom/docs.
The tables in these sections list the set of SNMP traps that are generated from Oracle ILOM.
"Environmental Events" on page 293
■
"Hard Disk Drive Components" on page 291
■
292 Oracle Server X7-2L Service Manual • October 2017
IPMI Type Description
Indicator Hard disk drive OK to Remove LED
FRU NVMe drive FRU
Discrete sensor NVMe device presence
Values (if applicable)
Location: HDD
Off: Normal
On: Hard disk drive was diagnosed
as faulty.
Color: Blue
Location: HDD
Off: Normal
On: Drive is ready to remove
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT