Bios Advanced Menu Iscsi Configuration Options - Oracle X6-2 Service Manual

Setup Options
Static IPv6 Address (R/O)
Commit
BIOS Advanced Menu iSCSI Configuration
Options
The following table lists the BIOS Advance Menu iSCSI Configuration options.

BIOS Advanced Menu iSCSI Configuration Options

TABLE 36
Setup Options
iSCSI Initiator Name
Add an Attempt
iSCSI Attempt Name
iSCSI Mode
Internet Protocol
Options Defaults
Options Defaults
NA (must be specified) None
NA (must be specified) None
Disabled/Enabled/Enabled Disabled
for MPIO
IP4/IP6/Autoconfigure IP4
BIOS Advanced Menu Selections
Description
information for the
device.
■ Dhcpv6_stateful:
When enabled, the
Dhcpv6_stateful
autoconfiguration is
run to learn the IP
addresses and DNS
information for the
device.
Set the static IPv6 address.
Example: 2001:0db0:
000.82a1:0000:0000:
1234:abcd
Commit the current BMC
LAN information.
Description
The worldwide unique
name of the iSCSI
Initiator. Only IQN format
is accepted.
The human-readable name
that you assigned to this
attempt.
Set to Enabled for
multipath I/O (MPIO).
MPIO can boost the
performance of an
application by load
balancing traffic across
multiple ports.
Can be set to IP4, IP6,
or Autoconfigure. The
initiator IP address is
assigned by the system
to IP6. In Autoconfigure
mode, the iSCSI driver
attempts to connect to the
BIOS Setup Utility Menu Options 241