Oracle X6-2 Service Manual page 212

Select Legacy BIOS or UEFI Boot Mode
The UEFI/BIOS dialog box appears.
Note -
reboot is required to properly populate the Boot Options Priority list with devices that support
the chosen boot mode.
Use the up and down arrow keys to select the appropriate Legacy or UEFI mode,
4.
and then press Enter.
5. Press the F10 key to save the changes and exit the BIOS Setup Utility.
Related Information
"BIOS Setup Utility Menus" on page 202
■
"BIOS Key Mappings" on page 203
■
"Exit BIOS Setup Utility" on page 224
■
212 Oracle Server X6-2 Service Manual • June 2016
You cannot configure the boot device priority after switching the boot mode. A system