Power Supply Status Indicators; Network Management Port Status Indicators - Oracle X6-2 Service Manual

Server Front Storage Drive Indicators
TABLE 3
Status Icon
Indicator Name
OK/Activity
Service
Required
OK to Remove

Power Supply Status Indicators

There are two status indicators (LEDs) on each power supply. These indicators are visible from
the rear of the server.
TABLE 4
Status
Indicator
Name
AC OK/DC
OK
Service
Required

Network Management Port Status Indicators

The server has one 10/100/1000 BASE-T Ethernet management domain interface, labeled NET
MGT. There are two status indicators (LEDs) on this port. These indicators are visible from the
rear of the server.
TABLE 5
Status
Indicator
Name
Activity
Color State and Meaning
Green ■ OFF – Power is off or the installed drive is not recognized by the system.
■ STEADY ON – The drive is engaged and is receiving power.
■ Random BLINK – There is disk activity. The indicator blinks on and off to indicate
activity.
Amber ■ OFF – The storage drive is operating normally.
■ STEADY ON – The system has detected a fault with the storage drive.
Blue ■ STEADY ON – The storage drive can be removed safely during a hot-plug operation.
■ OFF – The storage drive has not been prepared for removal.
Server Power Supply Indicators
Icon Color
Green
Amber
Network Management Port Status Indicators
Location Color
Top right Green
Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
State and Meaning
■ OFF – No AC power is present.
■ SLOW BLINK – Normal operation. Input power is within
specification. DC output voltage is not enabled.
■ STEADY ON – Normal operation. Input AC power and DC
output voltage are within specification.
■ OFF – Normal operation. No service action is required.
■ STEADY ON – The power supply (PS) has detected a PS fan
failure, PS overtemperature, PS over current, or PS over or under
voltage.
State and Meaning
■ ON – Link up.
■ OFF – No link or down link.
Troubleshooting and Diagnostics 31