Servicing Frus - Oracle X6-2 Service Manual

Servicing FRUs

The following sections describe how to service field-replaceable units (FRUs). For more
information about FRUs, see
Units" on page 20.
You must power down the system and disconnect the AC power cords from the server before
servicing any of these components.
Only authorized Oracle Services personnel should service FRUs.
Note -
Description
Service the processors.
Service the Oracle PCIe NVMe switch card.
Service the internal host bus adapter (HBA)
Service the disk backplane.
Service the DVD drive.
Service the front indicator module.
Service the motherboard.
Service the internal HBA cable assembly.
Service the Oracle PCIe NVMe switch card cables.
Service the power, FIM, disk backplane data, and DVD
cables.
Related Information
"Servicing CRUs That Do Not Require Server Power-Off" on page 63
■
"Servicing CRUs That Require Server Power-Off" on page 85
■
"Illustrated Parts Breakdown" on page 17
Link
"Servicing Processors (FRU)" on page 120
"Servicing the Oracle PCIe NVMe Switch Card
(FRU)" on page 137
"Servicing the Internal HBA Card (FRU)" on page 140
"Servicing the Disk Backplane (FRU)" on page 150
"Servicing the DVD Drive (FRU)" on page 156
"Servicing the Front Indicator Module
(FRU)" on page 158
"Servicing the Motherboard (FRU)" on page 162
"Servicing the Internal HBA SAS Cable
assembly" on page 173
"Servicing the NVMe Cables" on page 177
"Servicing the Power, FIM, Disk Backplane Data, and
DVD Cables" on page 181
and "Field-Replaceable
Servicing FRUs 119