Bios Advanced Menu Ethernet Controller Options - Oracle X6-2 Service Manual

Setup Options
CHAP Type
CHAP Name
CHAP Secret
Delete Attempts
Change Attempt Order

BIOS Advanced Menu Ethernet Controller Options

The following table lists the BIOS Advance Menu Ethernet Controller options.
TABLE 37 BIOS Advanced Menu Ethernet Controller Options
Setup Options
Port Configuration Menu
NIC configuration
Link Speed (R/O)
Wake on LAN
Blink LEDs
Port Configuration
Information
UEFI Driver (R/O)
Options Defaults
One Way/Mutual One Way
NA None
NA None
NA NA
NA NA
Options Defaults
Supported port speeds/ NA
Auto Negotiate
Disable/Enabled NA
0/1/2/3 0
NA NA
BIOS Advanced Menu Selections
Description
CHAP, Kerberos, and
None.
Use to set CHAP type to
either One Way or Mutual.
Use to set CHAP name.
Use to set the CHAP secret
password. The secret
length range is 12 to 16
bytes.
Use to delete one or more
attempts.
Use to change the order of
attempts. Use arrow keys
to select the attempt, then
press +/- keys to move the
attempt up/down in the
attempt order list.
Description
Use to configure the
network interface
controller.
Specifies the port speed
used for the selected boot
protocol.
Note - This option is not
supported.
Enable or disable wake on
LAN.
Note - This option is not
supported.
Use to identify the
physical network port by
blinking the associated
LED.
Displays and specifies
the port settings for the
network device.
Identifies the UEFI driver.
BIOS Setup Utility Menu Options 243