Oracle X6-2 Service Manual page 185

b. Connect connect the DVD cable to the motherboard [7].
c. If you removed a PCIe card from PCIe slot 2, install the PCIe riser and card
into PCIe slot 2.
See "Install a PCIe Riser Into PCIe Slot 1 or 2" on page 101
Install the FIM cable.
2.
To install the FIM cable into the motherboard, open both side latches and
a.
plug the FIM connector into motherboard connector [6].
The motherboard connector side latches will close, locking the FIM cable connector in
place.
Connect the FIM cable to the FIM [5].
b.
Install the FIM into the server.
c.
See "Install the Front Indicator Module " on page 161
Install the Auxiliary power and signal cable.
3.
To install the auxiliary power and signal cable into the disk backplane,
a.
ensure that the latches on the disk backplane connector are in the open
position and plug the cable connector into the disk backplane connector [4].
The disk backplane connector side latches will close, locking the auxiliary power and
signal cable connector in place.
To install the auxiliary power and signal cable into the motherboard, ensure
b.
that the latches on the motherboard connector are in the open position and
plug the cable connector into the motherboard connector [3].
The motherboard connector side latches will close, locking the auxiliary power and signal
cable connector in place.
4. Install the disk backplane power cable.
a. To connect the disk backplane power cable to the disk backplane, plug the
cable connector into the disk backplane connector. [2].
b. To connect the disk backplane power cable to the motherboard, plug the
cable connector into the motherboard connector. [1].
5. Install all of the server fan modules.
See "Install a Fan Module" on page
Install the Power, FIM, Disk Backplane Data, and DVD Cables
79.
Servicing FRUs 185