3.
To disconnect the switch card cables from the disk backplane, press the latches
on the cable connectors and pull the connectors out [1].
Remove the PCIe riser that contains the switch card from PCIe slot 1.
4.
See
"Remove a PCIe Riser From PCIe Slot 1 or 2" on page
5.
Disconnect the cables from the switch card. [2]
6.
Carefully pull the switch card cables through chassis mid-wall and remove them
from the server.
Related Information
"Install the NVMe Cables" on page 180
■
Removing the NVMe Cables
99.
Servicing FRUs
179