Table 26: Chassis Id Subtype; Table 27: System Capabilities - Edge-Core ECS3510-10PD Management Manual

Use the Administration > LLDP (Show Local Device Information) page to
D LLDP
ISPLAYING
display information about the switch, such as its MAC address, chassis ID,
L D
OCAL EVICE
management IP address, and port information.
I
NFORMATION
CLI R
◆
P
ARAMETERS
These parameters are displayed:
Global Settings
◆
◆
◆
◆
◆
EFERENCES
"show lldp info local-device" on page 1322
Chassis Type – Identifies the chassis containing the IEEE 802 LAN
entity associated with the transmitting LLDP agent. There are several
ways in which a chassis may be identified and a chassis ID subtype is
used to indicate the type of component being referenced by the chassis
ID field.

Table 26: Chassis ID Subtype

ID Basis Reference
Chassis component EntPhysicalAlias when entPhysClass has a value of 'chassis(3)'
(IETF RFC 2737)
Interface alias IfAlias (IETF RFC 2863)
Port component EntPhysicalAlias when entPhysicalClass has a value 'port(10)' or
'backplane(4)' (IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress
Interface name ifName (IETF RFC 2863)
Locally assigned locally assigned
Chassis ID – An octet string indicating the specific identifier for the
particular chassis in this system.
System Name – A string that indicates the system's administratively
assigned name (see "Displaying System Information" on page
System Description – A textual description of the network entity. This
field is also displayed by the show system command.
System Capabilities Supported – The capabilities that define the
primary function(s) of the system.

Table 27: System Capabilities

ID Basis Reference
Other —
Repeater IETF RFC 2108
Bridge IETF RFC 2674
– 439 –
| Basic Administration Protocols
C 14
HAPTER
Link Layer Discovery Protocol
119).