YASKAWA CIMR-JC4A0002BAA Quick Start Manual page 46

3.5 Protective Covers
n
Reattaching the Protective Covers
Properly connect all wiring and route power wiring away from control signal wiring. Reattach
all protective covers when wiring is complete. Apply only a small amount of pressure to lock
the cover back into place.
Figure 3.8 Reattach the Protective Covers on an IP20/Open-Chassis Drive
3
YASKAWA ELECTRIC TOEP C710606 26B YASKAWA AC Drive – J1000 Quick Start Guide 45
http://nicontrols.com