Changing Parameter Settings Or Values - YASKAWA CIMR-JC4A0002BAA Quick Start Manual

Frequency reference
appears when powered up
STOP
<1>
Parameter Display
STOP
STOP
STOP
STOP
u

Changing Parameter Settings or Values

This example explains changing C1-01 (Acceleration Time 1) from 10.0 seconds (default) to
20.0 seconds.
1. Turn on the power to the drive. The initial display appears.
2.
Press the key until the Setup Mode Screen appears.
YASKAWA ELECTRIC TOEP C710606 26B YASKAWA AC Drive – J1000 Quick Start Guide
4.3 The Drive and Programming Modes
Press until
appears
Control Circuit
Select digit
Terminal
<1> Move to the right to change parameter settings. Scroll
down to view and check settings in the Setup Mode.
<2> To return to the Top Menu, press
other parameters, press
Figure 4.5 Setup Group Example
Step
http://nicontrols.com
to edit
<2>
Parameter Display
. To view or edit
and .
LED Operator
(2x)
Display/Result
83
4