Rule Name
Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.
Action
Select the traffic type.
Type
Select the service type.
Service
The new rule will be listed at the bottom of the page with sequence number, rule name, action, protocol,
type, source, destination and operation. Users can click on
the rule. Save the change and reboot the device for the configuration to take effect.
Figure 38: Create New Firewall Rule
Table 15: Firewall Rule Settings
ACCEPT
REJECT
DROP
IN
If selected, users will need specify the network interface "LAN", "WAN" or
"Both" for the incoming traffic.
OUT
FTP
SSH
Telnet
TFTP
HTTP
LDAP
Custom
If selected, users will need specify Source (IP and port), Destination (IP and
port) and Protocol (TCP, UDP or Both) for the service. Please note if the
source or the destination field is left blank, it will be used as "Anywhere".
UCM6510 IP PBX User Manual
to edit the rule, or click on
to delete
P a g e
|
71